(1) Childs PRN, Jagtap S, Stettler M, 2020. Responsible Aviation Options. Keynote at the Chinese International Turbomachinery Conference CITC2020, 1st November 2020.
(2) Wang X, Zhu L, Sun L, Li N, 2020. A study of functionally graded lattice structural design and optimisation, 5th International Conference on Design, Mechanical and Material Engineering (D2ME 2020), 25-27 September 2020, Suzhou, China.
(3) Tan Z, Zhao B, Jiang J, Li Z, Lin J, 2020. A study on the hot roll bonding of aluminum alloys, Procedia Manufacturing, 50:56-62. https://doi.org/10.1016/j.promfg.2020.08.134
(4) Gu B, Jiang S, Shi Z, Lin J, 2020. On the lower limit of misorientation of grain boundaries in hot forging of AA7050, Procedia Manufacturing, 50:744-748. https://doi.org/10.1016/j.promfg.2020.08.134
(5) Liu S, Shi Z, Lin J, Li Z, 2020. Reinforcement learning in free-form stamping of sheet-metals, Procedia Manufacturing, 50:444-449. https://doi.org/10.1016/j.promfg.2020.08.081
(6) Zhou W, Rong Q, Shi Z, Zeng Y, 2020. Non-linear finite element investigation of formability limit by buckling in creep age forming of stiffened panels, Procedia Manufacturing, 50:625-629. https://doi.org/10.1016/j.promfg.2020.08.112
(7) Zheng J-H, Pan R, Lin J, Davies CM, 2020. FE Simulation of the residual stress reduction in industrial-sized T-section component during a newly proposed manufacturing process, Procedia Manufacturing, 50:492-497. https://doi.org/10.1016/j.promfg.2020.08.112
(1) Du L, Shi Z, Han Y, Shao J, Zheng K, Li Y, Lu W. Development of constitutive equations for hot working of titanium matrix composite, Proceedings of the 14th World Conference on Titanium, June 10-14, 2019, Nantes, France.
(1) Luan Q, Lee J, Zheng Z, Lin J, Jiang J, 2018. Static recrystallization study on pure aluminium using crystal plasticity finite element and phase-field modelling, Procedia Manufacturing, 15:1800–1807. https://doi:10.1016/j.promfg.2018.07.211
(2) Kopeć M, Wang K, Wang Y, Wang L, Lin J, 2018. Feasibility study of a novel hot stamping process for Ti6Al4V alloy, MATEC Web of Conferences, ISSN: 2261-236X, DOI: 10.1051/matecconf/201819008001, 190:2018
(3) Wang K, Kopeć M, Qu H, Wang Y, Wang L, Lin J, Li Z, 2018. A unified constitutive model for two-phase titanium alloys under hot stamping condition, ICNFT 2018, 5th International Conference on New Forming Technology, 2018-08-18/08-21, Bremen (DE), pp.1-1, 2018
(4) Liu J, Kaboglu C, Liu H, Blackman BRK, Kinloch AJ, Dear JP, 2018. High speed digital image correlation for impact performance of thermoplastic and thermoset composites, Proceedings of 18th European Conference on Composite Materials (ECCM18), 24 -28 June 2018, Athens, Greece.
(1) Zhu L, Li N, Fu Q, Childs PRN, 2017. Enablers for optimisation in lightweighting in aerospace: a review, in Purnendu Das (ed), Proceedings of 2nd International Conference on Lightweight Design of Materials and Engineering Structures (LIMAS 2017), 13-14 November 2017, London, United Kingdom, P. 55-62.
(2) Zhu L, Li N, Childs PRN, 2017. Light-weighting in aerospace component and system design, Proceedings of the 6th International Symposium on Jet Propulsion and Power Engineering, 16-18 October, 2017, Beijing, China
(3) Zheng J. Davies CM, Lin J, 2017. Comparison of creep deformation rates during load and strain controlled multi-step creep ageing tests on AA7050, 20th International ESAFORM Conference on Material Forming, Dublin City University, Ireland, 26-28 April 2017.
(1) Wei Xiong, Xichang Wang,Xiaoang Cao, John P. Dear,BamberBlackman, 2016. Effect of the surfi-sculpt protrusion density on the static mechanical properties of composite-metal joint. ECCM17 The European Conference on Composite Materials, Klaus Drechsler, Technical University of Munich, Internationals Congress Centre München, Munich, Germany, 25-30 June 2016.
(2) Yu L, Mohagheghian I, Wang Y, Dear JP, 2016. Impact performance of composite sandwich structure under low and high velocity impact. ICILSM 1st International Conference on Impact Loading of Structures and Materials. Turin, Italy, 22-26 May 2016.
(1) Gao H, Weng T, Liu J, Li C, Li Z, Wang L, 2015. Hot stamping of an Al-Li alloy: a feasibility study. ICNFT2015 - Proceedings of the 4th International Conference on New Forming Technology, Scotland, UK, 6-9 August 2015.
(2) Yuan X, Zhou D, Politis DJ, Ma G, Wang L, 2015. Tool Life Prediction under Multi-cycle Loading Conditions: a feasibility study. ICNFT2015 - Proceedings of the 4th International Conference on New Forming Technology, Scotland, UK, 6-9 August 2015.
(3) Lam ACL, Shi Z, Huang X, Yang Y-L, Zeng Y, Lin J, 2015. Material modelling for creep-age forming of aluminium alloy 7B04. ICNFT2015 - Proceedings of the 4th International Conference on New Forming Technology, Scotland, UK, 6-9 August 2015.
(4) Yu L, Mohagheghian I, Blackman B, Dear J, 2015. Impact performance of composite sandwich structure under high velocity impact. ICCM 20- 20th International Conference on Composite Materials, Yapa Rajapakse, Office of Naval Research, U.S.A (19-24 July, 2015), Copenhagen, Denmark. Paper Ref: 150701-1060.
(5) Zhang K, Yu L, Jia Y, Blackman B, Dear J, Williams G, 2015. Investigation of thickness effects on shear characterisation of composites materials for aircraft structures. ICCM 20- 20th International Conference on Composite Materials, Yapa Rajapakse, Office of Naval Research, U.S.A (19-24 July, 2015), Copenhagen, Denmark, Paper Ref: 150701-1190.
(6) Wang X, Ahn J, Blackman BK, 2015. Investigation of failure modes and mechanical properties of hybrid joints with different interface patterns using digital image correlation. ICCS 18-18th International Conference on Composite Structures, Antonio J. M. Ferreira, Faculdade de Engenharia da Universidade do Porto, Portugal (15-18 June, 2015), Lisbon, Portugal.
(7) Xiong W, Blackman, BK, Dear PJ, Wang X, 2015. Effect of thickness and layup on the mechanical properties of composite-metal joints strengthened by surfi-sculpt. ICCS 18-18th International Conference on Composite Structures Antonio J. M. Ferreira, Faculdade de Engenharia da Universidade do Porto, Portugal (15-18 June, 2015), Lisbon, Portugal, Paper Ref: 8248.
(8) Lee J, Balint D, 2015. Optimal passive shunt parameters for beams with periodic piezoelectric patches. Phononics 2015 – 3rd International Conference on Phononic Crystals, Metamaterials, Phonon Transport and Phonon Coupling, Paris, France, 31 May - 5 June 2015. (Paper Ref: 235-413).
(9) Lee J, Balint D, Ruffini V, 2015. Determining band structures from a small number of frequency response measurements. Phononics 2015 – 3rd International Conference on Phononic Crystals, Metamaterials, Phonon Transport and Phonon Coupling, Paris, France, 31 May - 5 June 2015. (Paper Ref: 209-413).
(1) Ahn J, Chen L, Davies CM, Dear JP, 2014. Parametric optimisation and joint heterogeneity characterization of fibre laser welding of AA2024-T3. Proceedings of the 67th International Institute of Welding Annual Assembly & International Conference, Chang, H.S. ed., Sheraton Grande Walkerhill & W Seoul, Walkerhill, Seoul, Korea, 13 - 18 July 2014
(2) Ahn J, Chen L, Davies CM, Dear JP, 2014. Digital Image Correlation for Determination of Local Constitutive Properties of Fibre Laser Welding Joints in AA2024-T3. Proceedings of the 16th International Conference on Experimental Mechanics, Barton, J. ed., University of Cambridge, UK, 7-11 July 2014
(3) Ahn J, Wimpory RC, Chen L, Davies CM, 2014. Residual Stress Measurements in Fibre Laser Beam Welded Plates of Aluminium Alloy AA2024-T3. Proceedings of the 16th International Conference on Experimental Mechanics, Barton, J. ed., University of Cambridge, UK, 7-11 July 2014