Citation

BibTex format

@article{Phillips:2015:10.1039/C5LC00430F,
author = {Phillips, T and Bannock, JH and de, Mello JC},
doi = {10.1039/C5LC00430F},
journal = {Lab on a Chip},
pages = {2960--2967},
title = {Microscale extraction and phase separation using a porous capillary},
url = {http://dx.doi.org/10.1039/C5LC00430F},
volume = {15},
year = {2015}
}

RIS format (EndNote, RefMan)

TY  - JOUR
AB - We report the use of a porous polytetrafluoroethylene capillary for the inline separation of liquid–liquid segmented flows, based on the selective wetting and permeation of the porous capillary walls by one of the liquids. Insertion of a narrow flow restriction at the capillary outlet allows the back pressure to be tuned for multiple liquid–liquid combinations and flow conditions. In this way, efficient separation of aqueous–organic, aqueous–fluorous and organic–fluorous segmented flows can be readily achieved over a wide range of flow rates. The porous-capillary-separator enables the straightforward regeneration of a continuous flow from a segmented flow, and may be applied to various applications, including inline analysis, biphasic reactions, and purification. As a demonstration of the latter, we performed a simple inline aqueous–organic extraction of the pH indicator 2,6-dichloroindophenol. An aqueous solution of the conjugate base was mixed with hydrochloric acid in continuous flow to protonate the indicator and render it organic-soluble. The indicator was then extracted from the aqueous feed into chloroform using a segmented flow. The two liquids were finally separated inline using a porous PTFE capillary, with the aqueous phase emerging as a continuous stream from the separator outlet. UV-visible absorption spectroscopy showed the concentration of indicator in the outflowing aqueous phase to be less than one percent of its original value, confirming the efficacy of the extraction and separation process.
AU - Phillips,T
AU - Bannock,JH
AU - de,Mello JC
DO - 10.1039/C5LC00430F
EP - 2967
PY - 2015///
SN - 1473-0197
SP - 2960
TI - Microscale extraction and phase separation using a porous capillary
T2 - Lab on a Chip
UR - http://dx.doi.org/10.1039/C5LC00430F
UR - http://hdl.handle.net/10044/1/26585
VL - 15
ER -