Publications

BibTex format

@inproceedings{Gulli:2014,
author = {Gulli, S and Maddalena, L and McKelvey, C and Brown, A and Nikishkov, Y and Makeev, A},
title = {Permeability measurements of complex porous structures for reusable thermal protection systems (invited paper)},
year = {2014}
}

Download

RIS format (EndNote, RefMan)

TY  - CPAPER
AB  - Reusable thermal protection systems are one of the key technologies that have to be improved in order to afford long-duration hypersonic flights. Transpiration cooling has been demonstrated to be one of the most promising active cooling techniques in terms of temperature decreasing and coolant mass saving. The coupling of the boundary layer with the thermal response of selected porous materials plays a crucial role in enabling the practical use of the transpiration cooling technique for reusable thermal protection systems. In this work, a novel test-rig for the non-intrusive characterization in terms of local permeability of a customized porous Carbon-Carbon nose-tip is proposed. The new concept of effective permeability, conceived as the local blowing capability of a porous structure with respect to a selected coolant fluid, is also introduced. The coolant (air) mass-fluxes blown from the porous surface of the specimen, and measured by a hot-film probe, are related to the average pressure gradient across the local material thickness by using the Darcy's law on prescribed locations. A parallel work, based on the X-Ray computed tomography scan of the prototype specimen, has been carried out with the purpose of defining the most important guidelines for the effective-permeability tests. Specifically, the calculation of the average porosity is used to define the minimum area to be probed with the hot-wire. The analysis of the statistical distribution of the void structures inside the C/C cone, coupled to the use of the theory of fluid-flow through perforated plates, is performed to determine the correct distance of the hot-wire from the wall. The results show permeability variation among the surveyed locations ranging from 6% to 172%. The effective-permeability map obtained allows classifying the prototype C/C mask as a semi-pervious structure. In particular, the higher effective permeability is located near the stagnation point region where two delaminations are locat
AU  - Gulli,S
AU  - Maddalena,L
AU  - McKelvey,C
AU  - Brown,A
AU  - Nikishkov,Y
AU  - Makeev,A
PY  - 2014///
TI  - Permeability measurements of complex porous structures for reusable thermal protection systems (invited paper)
ER  -

Download

DrAndreBrown

Contact

Location

Summary

Citation

BibTex format

RIS format (EndNote, RefMan)