Imperial College London

DrKathrynHadler

Faculty of EngineeringDepartment of Earth Science & Engineering

Honorary Lecturer
 
 
 
//

Contact

 

+44 (0)20 7594 6510k.hadler

 
 
//

Location

 

2.60Aston WebbSouth Kensington Campus

//

Summary

 

Publications

Citation

BibTex format

@inproceedings{Norori-McCormac:2014,
author = {Norori-McCormac, A and Hadler, K and Cilliers, JJ},
title = {Peak Air Recovery: An investigation into the effect of particle size},
year = {2014}
}

RIS format (EndNote, RefMan)

TY  - CPAPER
AB - Air recovery, the fraction of air entering a flotation cell that overflows the cell lip, is linked to flotation performance, and it has been shown through industrial testwork that operating flotation cells at air rates that yield the Peak Air Recovery (PAR) results in high mineral recovery. For operating parameters over which flotation plants have little control, such as particle size, investigating the effect on the position of PAR, and the subsequent effect on flotation performance, proves more challenging. To this end, we have developed a bench scale flotation system that runs continuously and exhibits froth behavior similar to that found industrially, allowing the study of such parameters as particle size in addition to air rate. The bench scale system comprises a 4 l baffled cylindrical flotation cell, stirred by a Rushton impeller. The concentrate is recycled back into the pulp, allowing for continuous operation. Glass beads are used as solid particles, allowing a wide range of particle sizes to be tested, with TTAB as collector and MIBC as frother. The system allows operation at air rates typical of industrial flotation systems (1-2 cms<sup>-1</sup> superficial gas velocity), in addition to yielding a froth that coalesces and bursts and exhibits a peak in air recovery as cell air rate in increased. Solids and water recovery is also measured. The results show that air recovery is sensitive to changes in particle size. The intermediate size distribution showed a peak in air recovery (PAR) that corresponded with the maximum solids flowrate, as found industrially. It is shown that finer particles do result in more stable froths and higher recoveries, particularly at low air rates. The effect of particle size on the position of PAR is not yet unequivocally determined from these results.
AU - Norori-McCormac,A
AU - Hadler,K
AU - Cilliers,JJ
PY - 2014///
TI - Peak Air Recovery: An investigation into the effect of particle size
ER -