TY - JOUR AB - Functionally graded porous structures (FGPSs) are gaining interest in the biomedical sector, specifically for orthopaedic implants. In this study, the compressive behaviour of seven different FGPSs comprised of Face Centred Cubic (FCC) and the Octet truss unit cells (OCT) were analysed. The porosity of the structures were graded in different directions (radially, longitudinally, laterally and longitudinally & radially) by varying the strut diameters or by combining the two types of unit cells. The structures were manufactured by laser power bed fusion and compression tests were performed. Radially and laterally porous graded structures were found to outperform uniform porous structures with an increase in stiffness of 13.7% and 21.1% respectively. The experimental and finite element analysis (FEA) results were in good agreement with differences in elastic modulus of 9.4% and yield strength of 15.8%. A new FEA beam model is proposed in this study to analyse this type of structures with accurate results and the consequent reduction of computational time. The accuracy of the Kelvin-Voight model and the rule of mixtures for predicting the mechanical behaviour of different FGPSs was also investigated. The results demonstrate the adequacy of the analytical models specifically for hybrid structures and for structures with smooth diameter transitions. AU - Ruiz,de Galarreta S AU - Doyle,RJ AU - Jeffers,J AU - Ghouse,S DO - 10.1016/j.jmbbm.2021.104784 EP - 12 PY - 2021/// SN - 1751-6161 SP - 1 TI - Laser powder bed fusion of porous graded structures: A comparison between computational and experimental analysis T2 - Journal of the Mechanical Behavior of Biomedical Materials UR - http://dx.doi.org/10.1016/j.jmbbm.2021.104784 UR - https://www.sciencedirect.com/science/article/pii/S1751616121004264?via%3Dihub UR - http://hdl.handle.net/10044/1/91282 VL - 123 ER -