Citation

BibTex format

@article{Kkelis:2017:10.1109/TPEL.2016.2641260,
author = {Kkelis, G and Yates, DC and Mitcheson, PD},
doi = {10.1109/TPEL.2016.2641260},
journal = {IEEE Transactions on Power Electronics},
pages = {8322--8337},
title = {Class-E half-wave zero dv/dt rectifiers for inductive power transfer},
url = {http://dx.doi.org/10.1109/TPEL.2016.2641260},
volume = {32},
year = {2017}
}

RIS format (EndNote, RefMan)

TY  - JOUR
AB - This paper analyses and compares candidate zero dv/dt half-wave Class-E rectifier topologies for integration into multi-MHz inductive power transfer (IPT) systems. Furthermore, a hybrid Class-E topology comprising advantageous properties from all existing Class-E half-wave zero dv/dt rectifiers is analysed for the first time. From the analysis, it is shown that the hybrid Class-E rectifier provides an extra degree of design freedom which enables optimal IPT operation over a wider range of operating conditions. Furthermore, it is shown that by designing both the hybrid and the current driven rectifiers to operate below resonance provides a low deviation input reactance and inherent output voltage regulation with duty cycle allowing efficient IPT operation over wider dc load range than would otherwise be achieved. A set of case studies demonstrated the following performances: 1) For a constant dc load resistance, a receiving end efficiency of 95% was achieved when utilising the hybrid rectifier, with a tolerance in required input resistance of 2.4% over the tested output power range (50W to 200W). 2) For a variable dc load in the range of 100% to 10%, the hybrid and current driven rectifiers presented an input reactance deviation less than 2% of the impedance of the magnetising inductance of the inductive link respectively and receiving end efficiencies greater than 90%. 3) For a constant current in the receiving coil, both the hybrid and the current driven rectifier achieve inherent output voltage regulation in the order of 3% and 8% of the nominal value respectively, for a variable dc load range from 100% to 10%.
AU - Kkelis,G
AU - Yates,DC
AU - Mitcheson,PD
DO - 10.1109/TPEL.2016.2641260
EP - 8337
PY - 2017///
SN - 0885-8993
SP - 8322
TI - Class-E half-wave zero dv/dt rectifiers for inductive power transfer
T2 - IEEE Transactions on Power Electronics
UR - http://dx.doi.org/10.1109/TPEL.2016.2641260
UR - https://ieeexplore.ieee.org/document/7842582
UR - http://hdl.handle.net/10044/1/43252
VL - 32
ER -