Publications
260 results found
Bethanis S, Cheeseman CR, Sollars CJ, 2004, Effect of sintering temperature on the properties and leaching of incinerator bottom ash, WASTE MANAGEMENT & RESEARCH, Vol: 22, Pages: 255-264, ISSN: 0734-242X
- Author Web Link
- Cite
- Citations: 23
Bethanis S, Cheeseman CR, 2004, Production of lightweight aggregate from incinerator bottom ash and pulverised fuel ash, Southampton, Conference on advanced waste treatment and management in Japan held at the 2nd international conference on waste management and the environment, Rhodes, Greece, 29 September - 1 October 2004, Publisher: Wit Press, Pages: 55-64
Cheesemnan CR, Sollars C, McEntee S, 2003, Properties, microstructure and leaching of sintered sewage sludge ash, RESOURCES CONSERVATION AND RECYCLING, Vol: 40, Pages: 13-25, ISSN: 0921-3449
- Author Web Link
- Cite
- Citations: 74
Rogers RD, Knights JJ, Cheeseman CR, et al., 2003, Development of test methods for assessing microbial influenced degradation of cement-solidified radioactive and industrial waste, CEMENT AND CONCRETE RESEARCH, Vol: 33, Pages: 2069-2076, ISSN: 0008-8846
- Author Web Link
- Cite
- Citations: 16
Fitch JR, Cheeseman CR, 2003, Characterisation of environmentally exposed cement-based stabilised/solidified industrial waste, JOURNAL OF HAZARDOUS MATERIALS, Vol: 101, Pages: 239-255, ISSN: 0304-3894
- Author Web Link
- Cite
- Citations: 23
Ilic M, Cheeseman C, Sollars C, et al., 2003, Mineralogy and microstructure of sintered lignite coal fly ash, FUEL, Vol: 82, Pages: 331-336, ISSN: 0016-2361
- Author Web Link
- Cite
- Citations: 147
Cheeseman C, Virdi G, 2003, Lightweight aggregate production from sintered sewage sludge ash, International conference on pollution in the metropolitan and urban environment (POLMET 2003), Hong Kong, 2 - 5 November 2003
Poon CS, Qiao XC, Lin ZS, et al., 2003, Stabilization and solidification of heavy metal waste using low grade fly ash, International conference on pollution in the metropolitan and urban environment (POLMET 2003), Hong Kong, 2 - 5 November 2003
Cheeseman CR, da Rocha SM, Sollars C, et al., 2003, Ceramic processing of incinerator bottom ash, WASTE MANAGEMENT, Vol: 23, Pages: 907-916, ISSN: 0956-053X
- Author Web Link
- Cite
- Citations: 79
Ilic M, Cheeseman CR, Sollars C, et al., 2003, Effect of ceramic processing on leaching of heavy metals from lignite coal fly ash, Proceedings of the 5th international conference on the environmental and technical implications of construction with alternative materials, 2003, Pages: 731-740
Scheidegger AM, Grolimund D, Cheeseman CR, 2002, A microspectroscopic study on the influence of the inherent heterogeneity of waste repository materials on contaminant uptake, GEOCHIMICA ET COSMOCHIMICA ACTA, Vol: 66, Pages: A676-A676, ISSN: 0016-7037
Monteiro da Rocha S, Cheeseman CR, Bethanis S, et al., 2002, Ceramic processing of incinerator bottom ash, Proceedings of the 4th AECEF international symposium - environmental aspects in civil engineering, Pages: 91-104
Knight J, Cheeseman C, Rogers R, 2002, Microbial influenced degradation of solidified waste binder, WASTE MANAGEMENT, Vol: 22, Pages: 187-193, ISSN: 0956-053X
- Author Web Link
- Cite
- Citations: 17
Bethanis S, Cheeseman CR, Sollars C, 2002, Properties and microstructure of sintered incinerator bottom ash, CERAMICS INTERNATIONAL, Vol: 28, Pages: 881-886, ISSN: 0272-8842
- Author Web Link
- Cite
- Citations: 81
Awe Y, Cheeseman C, Sollars C, 2001, Permeability of lime-activated pulverised fuel ash to metal-containing permeants, WASTE MANAGEMENT & RESEARCH, Vol: 19, Pages: 35-44, ISSN: 0734-242X
- Author Web Link
- Cite
- Citations: 4
Ortega EA, Cheeseman C, Knight J, et al., 2000, Properties of alkali-activated clinoptilolite, Cement and Concrete Research, Vol: 30, Pages: 1641-1646, ISSN: 1873-3948
Materials made by hydrating the natural zeolite clinoptilolite with calcium hydroxide (Ca(OH)2) have been characterised and compared to other alkali-activated waste-derived and naturally occurring pozzolana. Compressive strength is dependent on the Ca(OH)2 content, clinoptilolite particle size, and curing conditions. Optimising each of these factors has produced compacted materials containing 20 wt.% Ca(OH)2 with average compressive strengths of 38.7 MPa. Capillary rise tests have been used to determine sorptivity coefficients of dry samples that range from 0.027 to 0.087 cm min−1/2 depending on the alkali addition and the clinoptilolite particle size. Sorptivity depends on the Ca(OH)2 content and reducing the clinoptilolite particle size reduces sorptivity but increases the level of water accessible porosity. X-ray diffraction (XRD) confirms that Ca(OH)2 is consumed during curing and that it is not present in high strength, fully cured materials. Scanning electron microscopy combined with energy dispersive X-ray (SEM–EDX) analysis indicates the formation of hydration products with Ca/Si ratio in the range 0.8–1.2 and that a significant amount of unreacted clinoptilolite remains in optimised materials.
Stegemann JA, Perera ASR, Cheeseman C, et al., 2000, 1/8 factorial study of metal effects on acid neutralization by cement, JOURNAL OF ENVIRONMENTAL ENGINEERING-ASCE, Vol: 126, Pages: 925-933, ISSN: 0733-9372
- Author Web Link
- Cite
- Citations: 15
Cheeseman CR, Ip G, Knight J, et al., 2000, Characterisation of ceramics produced by sintering low-grade PFA, Proceedings of the ISWA International Symposium on Waste Management in Asian Cities, Pages: 259-264
Alcantara E, Cheeseman CR, Knight J, et al., 2000, Properties of alkali-activated clinoptilolite, Cement and Concrete Research, Vol: 30, Pages: 1641-1646
Cheeseman CR, Newman JB, Owens P, 2000, Why waste waste? A blueprint for generating products from waste in London, Millennium Competition, Award Winning Entries, Institute of Waste Management, Pages: 36-42
Cheeseman CR, Asavapisit S, 1999, Effect of calcium chloride on the hydration and leaching of lead-retarded cement, CEMENT AND CONCRETE RESEARCH, Vol: 29, Pages: 885-892, ISSN: 0008-8846
- Author Web Link
- Cite
- Citations: 26
Cheeseman CR, Batchelder M, Sechioti P, 1999, Effect of cations on permeant flow-through bentonite clays using a rapid filter press test, ENVIRONMENTAL TECHNOLOGY, Vol: 20, Pages: 499-506, ISSN: 0959-3330
- Author Web Link
- Cite
- Citations: 5
Rogers RD, Wolfram JH, Idachaba M, et al., 1999, Effects of microbial influences on materials used for storage of radioactive waste, Materials Research Society
Knight J, Cheeseman CR, Rogers RD, 1999, Microbial influenced degradation of solidified wastes, Proceedings of Waste Stabilization and Environment, Pages: 143-148
Cheeseman CR, Batchelder M, Sechioti P, 1999, Effect of permeant flow-through clays using a rapid filter press test, Environmental Technology, Vol: 20, Pages: 499-506
Cheeseman CR, Asavapisit S, Knight J, 1998, Effect of uniaxially pressing ordinary Portland cement pastes containing metal hydroxides on porosity, density, and leaching, CEMENT AND CONCRETE RESEARCH, Vol: 28, Pages: 1639-1653, ISSN: 0008-8846
- Author Web Link
- Cite
- Citations: 15
Butcher EJ, Cheeseman CR, Sollars CJ, et al., 1998, Flow-through Leach Testing applied to Stabilised/Solidified Wastes, Stabilization and Solidification of Hazardous, Radioactive and Mixed Wastes, American Society for Testing and Materials
Cheeseman CR, Knight J, Loizidou M, et al., 1998, Development of appropriate low cost industrial waste solidification systems for Mediterranean countries, Kriton Curi International Symposium on Environmental Management in the Mediterranean Region, Pages: 520-526
Asavapisit S, Fowler GD, Cheeseman CR, 1997, Solution chemistry during cement hydration in the presence of metal hydroxide wastes, Cement and Concrete Research, Vol: 27, Pages: 1249-1260
This data is extracted from the Web of Science and reproduced under a licence from Thomson Reuters. You may not copy or re-distribute this data in whole or in part without the written consent of the Science business of Thomson Reuters.