Imperial College London
Portrait Picture

DrJanetWong

Faculty of Engineering, Department of Mechanical Engineering

Reader in Tribology and Mechanochemistry
 
 
 
//

Contact

 

+44 (0)20 7594 8991j.wong

 
 
//

Location

 

671City and Guilds BuildingSouth Kensington Campus

//

Summary

 

Publications

Citation

BibTex format

@article{Jean-Fulcrand:2019:10.1016/j.triboint.2018.08.001,
author = {Jean-Fulcrand, A and Masen, MA and Bremner, T and Wong, JSS},
doi = {10.1016/j.triboint.2018.08.001},
journal = {Tribology International},
pages = {5--15},
title = {Effect of temperature on tribological performance of polyetheretherketone-polybenzimidazole blend},
url = {http://dx.doi.org/10.1016/j.triboint.2018.08.001},
volume = {129},
year = {2019}
}
Download

RIS format (EndNote, RefMan)

TY  - JOUR
AB  - Polyetheretherketone (PEEK) is one of the most commonly used High Performance Polymers (HPP) although its high temperature performance is poor. In this study, polybenzimidazole (PBI), a HPP with one of the highest glass transition temperatures currently available, is blended to PEEK to form a 50:50 blend (TU60). Tribological performance of the blend (TU60) was investigated by rubbing it against steel at temperatures up to 280 °C. Results obtained are compared to those from neat PEEK and neat PBI. All three polymers were thermally stable during the duration of tests. However chemical analyses on polymeric transfer layers on steel surfaces and polymer debris suggest polymer degradation. The degradation observed is shear-assisted, possibly promoted by shear heating. Indeed the estimated interfacial temperature based on Jaeger model was above the melting point of PEEK in some cases. TU60 outperforms PEEK in all test conditions and PBI at 280 °C. TU60 formed transfer layers on steel similar to that of PEEK. When contact temperature is closed to the melting point of PEEK, PEEK in the TU60 creates a low strength transfer layer which acts as an interfacial lubricant. This reduces friction which in turn reduces PBI degradation in TU60 at high temperature. This work provides a strategy for creating interfacial layers to improve polymer tribological performance while maintaining the integrity of the polymer.
AU  - Jean-Fulcrand,A
AU  - Masen,MA
AU  - Bremner,T
AU  - Wong,JSS
DO  - 10.1016/j.triboint.2018.08.001
EP  - 15
PY  - 2019///
SN  - 0301-679X
SP  - 5
TI  - Effect of temperature on tribological performance of polyetheretherketone-polybenzimidazole blend
T2  - Tribology International
UR  - http://dx.doi.org/10.1016/j.triboint.2018.08.001
UR  - http://hdl.handle.net/10044/1/62961
VL  - 129
ER  -
Download