Imperial College London
Portrait Picture

ProfessorJamesMoore Jr

Faculty of Engineering, Department of Bioengineering

The Bagrit & RAEng Chair in Medical Device Design
 
 
 
//

Contact

 

+44 (0)20 7594 9795james.moore.jr CV

 
 
//

Location

 

414Royal School of MinesSouth Kensington Campus

//

Summary

 

Publications

Publication Type
Year
to

142 results found

Dixon JB, Cote G, Gashev A, Greiner S, Moore J, Zaweija Det al., 2006, Image correlation method for measuring flow and diameter changes in contracting mesenteric microlymphatics <i>in situ</i>, Conference on Imaging, Manipulation, and Analysis of Biomolecules, Cells, and Tissues IV, Publisher: SPIE-INT SOC OPTICAL ENGINEERING, ISSN: 0277-786X

Conference paper

Duraiswamy N, Jayachandran B, Byrne J, Moore JE, Schoephoerster RTet al., 2005, Spatial distribution of platelet deposition in stented arterial models under physiologic flow, ANNALS OF BIOMEDICAL ENGINEERING, Vol: 33, Pages: 1767-1777, ISSN: 0090-6964

Journal article

Bluestein D, Moore J, 2005, Biofluids educational issues: An emerging field aims to define its next generation, ANNALS OF BIOMEDICAL ENGINEERING, Vol: 33, Pages: 1674-1680, ISSN: 0090-6964

Journal article

He Y, Duraiswamy N, Frank AO, Moore JEet al., 2005, Blood flow in stented arteries: A parametric comparison of strut design patterns in three dimensions, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, Vol: 127, Pages: 637-647, ISSN: 0148-0731

Journal article

Mori D, David G, Humphrey JD, Moore JEet al., 2005, Stress distribution in a circular membrane with a central fixation, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, Vol: 127, Pages: 549-553, ISSN: 0148-0731

Journal article

Dixon JB, Cote G, Gashev A, Greiner S, Moore J, Zaweija Det al., 2005, Measurement of flow in contracting mesenteric microlymphatic vessels in situ, Experimental Biology 2005 Meeting/35th International Congress of Physiological Sciences, Publisher: FEDERATION AMER SOC EXP BIOL, Pages: A164-A165, ISSN: 0892-6638

Conference paper

Yazdani SK, Moore JE, Berry JL, Vlachos PPet al., 2004, DPIV measurements of flow disturbances in stented artery models: Adverse affects of compliance mismatch, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, Vol: 126, Pages: 559-566, ISSN: 0148-0731

Journal article

Rolland PH, Mekkaoui C, Vidal V, Berry JL, Moore JE, Moreno M, Amabile P, Bartoli JMet al., 2004, Compliance matching stent placement in the carotid artery of the swine promotes optimal blood flow and attenuates restenosis, EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY, Vol: 28, Pages: 431-438, ISSN: 1078-5884

Journal article

Moore Jr JE, Zourdakis G, 2004, Biomedical Technology and Devices Handbook, Publisher: CRC PressI Llc, ISBN: 9780849311406

With topics ranging from the basic procedures like blood pressure measurement to cutting-edge imaging equipment, biological tests, and genetic engineering, this book is organized to navigate smoothly from simple procedures and concepts to ...

Book

Adams JA, Moore JE, Moreno MR, Coelho J, Bassuk J, Wu DMet al., 2003, Effects of periodic body acceleration on the <i>in vivo</i> vasoactive response to N-<i>w</i>-nitro-L-arginine and the <i>in vitro</i> nitric oxide production, ANNALS OF BIOMEDICAL ENGINEERING, Vol: 31, Pages: 1337-1346, ISSN: 0090-6964

Journal article

Robaina S, Jayachandran L, He Y, Frank A, Moreno MR, Schoephoerster RT, Moore JEet al., 2003, Platelet adhesion to simulated stented surfaces, JOURNAL OF ENDOVASCULAR THERAPY, Vol: 10, Pages: 978-986, ISSN: 1526-6028

Journal article

Deliargyris EN, Berry JL, Rolland PH, Mekkaoui C, Moore JEet al., 2003, A novel compliance matching design improves the hemodynamic and mechanical disturbances associated with stenting, 15th Annual Transcatheter Cardiovascular Therapeutics Symposium, Publisher: EXCERPTA MEDICA INC, Pages: 216L-217L, ISSN: 0002-9149

Conference paper

Walsh PW, Chin-Quee S, Moore JE, 2003, Flow changes in the aorta associated with the deployment of a AAA stent graft, MEDICAL ENGINEERING & PHYSICS, Vol: 25, Pages: 299-307, ISSN: 1350-4533

Journal article

Frank AO, Walsh PW, Moore JE, 2002, Computational fluid dynamics and stent design, ARTIFICIAL ORGANS, Vol: 26, Pages: 614-621, ISSN: 0160-564X

Journal article

Moore JE, 2002, Re: Analytical modeling and numerical simulation of forces in an endoluminal graft, JOURNAL OF ENDOVASCULAR THERAPY, Vol: 9, Pages: 251-252, ISSN: 1526-6028

Journal article

Moore JE, Berry JL, 2002, Fluid and solid mechanical implications of vascular stenting, ANNALS OF BIOMEDICAL ENGINEERING, Vol: 30, Pages: 498-508, ISSN: 0090-6964

Journal article

Berry JL, Manoach E, Mekkaoui C, Rolland PH, Moore JE, Rachev Aet al., 2002, Hemodynamics and wall mechanics of a compliance matching stent: In vitro and in vivo analysis, JOURNAL OF VASCULAR AND INTERVENTIONAL RADIOLOGY, Vol: 13, Pages: 97-105, ISSN: 1051-0443

Journal article

Weydahl ES, Moore JE, 2001, Dynamic curvature strongly affects wall shear rates in a coronary artery bifurcation model, JOURNAL OF BIOMECHANICS, Vol: 34, Pages: 1189-1196, ISSN: 0021-9290

Journal article

Moore JE, Weydahl ES, Santamarina A, 2001, Frequency dependence of dynamic curvature effects on flow through coronary arteries, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, Vol: 123, Pages: 129-133, ISSN: 0148-0731

Journal article

Rachev A, Manoach E, Berry J, Moore JEet al., 2000, Model of stress-induced geometrical remodeling of vessel segments adjacent to stents and artery/graft anastomoses, JOURNAL OF THEORETICAL BIOLOGY, Vol: 206, Pages: 429-443, ISSN: 0022-5193

Journal article

Abercrombie RF, Meng XJ, Moore JE, Wells KMet al., 2000, Chelator enhancement of active Ca transport, Publisher: ROCKEFELLER UNIV PRESS, Pages: 16A-17A, ISSN: 0022-1295

Conference paper

Berry JL, Santamarina A, Moore JE, Roychowdhury S, Routh WDet al., 2000, Experimental and computational flow evaluation of coronary stents, ANNALS OF BIOMEDICAL ENGINEERING, Vol: 28, Pages: 386-398, ISSN: 0090-6964

Journal article

Fragoso MA, Sit S, Walsh P, Szmulewicz MN, Herrera RJ, Moore JEet al., 1999, The effects of mechanical stress on the behavior of vascular endothelial cells., Publisher: AMER SOC CELL BIOLOGY, Pages: 323A-323A, ISSN: 1059-1524

Conference paper

Santamarina A, Weydahl E, Siegel JM, Moore JEet al., 1998, Computational analysis of flow in a curved tube model of the coronary arteries: Effects of time-varying curvature, ANNALS OF BIOMEDICAL ENGINEERING, Vol: 26, Pages: 944-954, ISSN: 0090-6964

Journal article

Moreno MR, Moore JE, Meuli R, 1998, Cross-sectional deformation of the aorta as measured with magnetic resonance imaging, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, Vol: 120, Pages: 18-21, ISSN: 0148-0731

Journal article

Delfino A, Moore J, Stergiopulos N, Vaclavik V, Genton CY, Meister JJet al., 1998, Wall stresses in the carotid bifurcation: Effects of wall non-homogeneity and correlation with intimal thickness, Journal of Vascular Investigation, Vol: 4, Pages: 61-71, ISSN: 1353-8012

A finite element model of the human carotid bifurcation was developed to investigate the possibility that pressure-induced arterial wall stresses lead to the formation of atherosclerosis. The effect of material non-homogeneity was investigated by measuring the distribution of collagen and elastin in cadaver specimens and applying different material constants where appropriate. Both the homogeneous and non-homogeneous models included the residual stresses. The histology results revealed that the outer wall of the apex contained proportionally more collagen. Elsewhere, relative distributions of collagen and elastin were uniform through the thickness. The finite element model results demonstrated that the area of highest stress concentration was the lateral wall of the carotid sinus. The outer wall stress at the apex was higher for the non-homogeneous model owing to the higher collagen content there, but the stresses elsewhere in the model were relatively unaffected. A statistical comparison of the stress distribution to previously published data on intimal thickness showed that areas with a high ratio of inner to outer wall stress coincided with greatest intimal thickening (r = 0.800, P < 0.00005). The inclusion of material non-homogeneity had little effect on this correlation.

Journal article

Greenwald SE, Moore JE, Rachev A, Kane TPC, Meister JJet al., 1997, Experimental investigation of the distribution of residual strains in the artery wall, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, Vol: 119, Pages: 438-444, ISSN: 0148-0731

Journal article

Delfino A, Stergiopulos N, Moore JE, Meister JJet al., 1997, Residual strain effects on the stress field in a thick wall finite element model of the human carotid bifurcation, JOURNAL OF BIOMECHANICS, Vol: 30, Pages: 777-786, ISSN: 0021-9290

Journal article

Schilt S, Moore JE, Delfino A, Meister JJet al., 1996, The effects of time-varying curvature on velocity profiles in a model of the coronary arteries, JOURNAL OF BIOMECHANICS, Vol: 29, Pages: 469-474, ISSN: 0021-9290

Journal article

Moore JE, Abercrombie RF, 1996, Do parvalbumin and calmodulin help deliver calcium to a microsomal Ca2+-pump?, Publisher: CELL PRESS, Pages: TU388-TU388, ISSN: 0006-3495

Conference paper

This data is extracted from the Web of Science and reproduced under a licence from Thomson Reuters. You may not copy or re-distribute this data in whole or in part without the written consent of the Science business of Thomson Reuters.

Request URL: http://wlsprd.imperial.ac.uk:80/respub/WEB-INF/jsp/search-html.jsp Request URI: /respub/WEB-INF/jsp/search-html.jsp Query String: id=00774088&limit=30&person=true&page=4&respub-action=search.html