Imperial College London
Portrait Picture

DrJunJiang

Faculty of Engineering, Department of Mechanical Engineering

Senior Lecturer
 
 
 
//

Contact

 

jun.jiang

 
 
//

Location

 

523City and Guilds BuildingSouth Kensington Campus

//

Summary

 

Publications

Citation

BibTex format

@article{Birosca:2019:10.1016/j.ijplas.2019.02.015,
author = {Birosca, S and Liu, G and Ding, R and Jiang, J and Simm, T and Deen, C and Whittaker, M},
doi = {10.1016/j.ijplas.2019.02.015},
journal = {International Journal of Plasticity},
pages = {252--268},
title = {The dislocation behaviour and GND development in a nickel based superalloy during creep},
url = {http://dx.doi.org/10.1016/j.ijplas.2019.02.015},
volume = {118},
year = {2019}
}
Download

RIS format (EndNote, RefMan)

TY  - JOUR
AB  - In the current study, dislocation activity and storage during creep deformation in a nickel based superalloy (Waspaloy) were investigated, focussing on the storage of geometrically necessary (GND) and statistically stored (SSD) dislocations. Two methods of GND density calculation were used, namely, EBSD Hough Transformation and HR-EBSD Cross Correlation based methods. The storage of dislocations, including SSDs, was investigated by means of TEM imaging. Here, the concept of GND accumulation in soft and hard grains and the effect of neighbouring grain orientation on total dislocation density was examined. Furthermore, the influence of applied stress (below and above the yield stress of Waspaloy) during creep on deformation micro-mechanism and dislocation density was studied. It was demonstrated that soft grains provided pure shear conditions on at least two octahedral (111) slip systems for easy dislocation movement. This allowed dislocations to reach the grain boundary without significant geometrically necessary dislocation accumulation in the centre of the grain. Hence, the majority of the soft grains appeared to have minimum GND density in the centre of the grain with high GND accumulation in the vicinity of the grain boundaries. However, the values and width of accumulated GND depended on the surrounding grain orientations. Furthermore, it was shown that the hard grains were not favourably oriented for octahedral slip system activation leading to a grain rotation in order to activate any of the available slip systems. Eventually, (i) the hard grain resistance to deformation and (ii) neighbouring grain resistance for the hard grain reorientation caused high GND density on a number of octahedral (111) slip systems. The results also showed that during creep below the yield stress of Waspaloy (500 MPa/700°C), the GND accumulation was relatively low due to the insufficient macroscopic stress level. However, the regions near grain boundaries showed high GND densit
AU  - Birosca,S
AU  - Liu,G
AU  - Ding,R
AU  - Jiang,J
AU  - Simm,T
AU  - Deen,C
AU  - Whittaker,M
DO  - 10.1016/j.ijplas.2019.02.015
EP  - 268
PY  - 2019///
SN  - 0749-6419
SP  - 252
TI  - The dislocation behaviour and GND development in a nickel based superalloy during creep
T2  - International Journal of Plasticity
UR  - http://dx.doi.org/10.1016/j.ijplas.2019.02.015
UR  - http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000469156900013&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=1ba7043ffcc86c417c072aa74d649202
UR  - https://www.sciencedirect.com/science/article/pii/S0749641918304613?via%3Dihub
UR  - http://hdl.handle.net/10044/1/76907
VL  - 118
ER  -
Download