Publications
170 results found
Guangteng G, Cann PME, Olver AV, et al., 2000, An experimental study of film thickness between rough surfaces in EHD contacts, Tribology International, Vol: 33, Pages: 183-189, ISSN: 0301-679X
Hurley S, Cann PME, Spikes HA, 2000, Lubrication and reflow properties of thermally aged greases, Tribology Transactions, Vol: 43, Pages: 221-228, ISSN: 0027-6782
Hurley S, Cann PME, 2000, Starved lubrication of EHL contacts: Relationship to bulk properties, NLGI Spokesman (National Lubricating Grease Institute), Vol: 64, Pages: 15-23, ISSN: 0027-6782
Guangteng G, Cann PME, Olver AV, et al., 2000, Lubricant film thickness in rough surface, mixed elastohydrodynamic contact, Transactions of the ASME Journal of Tribology, Vol: 122, Pages: 65-76, ISSN: 0742-4787
Hurley S, Cann PME, Spikes HA, 2000, Lubrication and reflow properties of thermally aged greases, Tribology Transactions, Vol: 43, Pages: 221-228, ISSN: 0027-6782
Hurley S, Cann PME, 2000, Examination of grease structure by SEM and AFM techniques, 67th Annual Meeting National Lubricating Grease Institute, Asheville NC, Pages: all-all
Hurley S, Cann PME, 2000, Infrared spectroscopic characterisation of grease lubricant films on metal surfaces, NLGI Spokesman (National Lubricating Grease Institute), Vol: 64, Pages: 13-21, ISSN: 0027-6782
Hurley S, Cann PME, Spikes HA, 2000, Lubrication and reflow properties of thermally aged greases, Tribology Transactions, Vol: 43, Pages: 9-14, ISSN: 1040-2004
Guangteng G, Cann PME, Olver AV, et al., 2000, An experimental study of film thickness between rough surfaces in EHD contacts, Tribology International, Vol: 33, Pages: 183-189, ISSN: 0301-679X
Hurley S, Cann P, 1999, Presentations for 66th annual meeting: Started lubrication of EHL contacts - Relationship to bulk grease properties. Paper 9904, NLGI Spokesman, Vol: 63, ISSN: 0027-6782
The effect of grease composition (thickener type and concentration) on lubricant film thickness under starved conditions was investigated. The film thickness of a number of model greases made with the same base oil but different thickeners (diurea, lithium complex, lithium hydroxystearate) was measured. Base oil release, yield stress, and contact replenishment measurements were related to starved film thickness. Shear stability was thought to be an important factor, as this will control grease breakdown and subsequent oil release at the side of the track. Starved film curves for a range of greases were related to the ability of the grease to replenish the contact. Original is an abstract.
Hurley S, Cann P, 1999, Presentations for 66th annual meeting: Characterisation of grease lubricant films. Paper 9924, NLGI Spokesman, Vol: 63, ISSN: 0027-6782
A study investigated rolled grease lubricant films applied on steel surfaces. This study focused on how the combination of high local shear stresses and the presence of the metal surface can lead to major changes in the chemistry and structure of grease lubricant films. Using IR reflectance microspectroscopy, this research determined the concentration and distribution of the grease components both within and outside the overrolled track. Changes in the film composition and the generation of new species, which were both the result of shear degradation, were observed. Original is an abstract.
Guangteng G, Cann PME, Spikes HA, et al., 1999, Mapping of surface features in the thin film lubrication regime, Lubrication at the Frontier, Editors: Dowson, Priest, Taylor, Ehret, Childs, Dalmaz, Berthier, Flamand, Georges, Lubrecht, Dowson, Priest, Taylor, Ehret, Childs, Dalmaz, Berthier, Flamand, Georges, Lubrecht, Dowson, Priest, Taylor, Ehret, Childs, Dalmaz, Berthier, Flamand, Georges, Lubrecht, Publisher: Elsevier Science, Pages: 175-183, ISBN: 9780444502674
Cann PME, 1999, Starved grease lubrication of rolling contacts, Tribology Transactions, Vol: 42, Pages: 867-873, ISSN: 1040-2004
Cann PME, 1999, Thin-film grease lubrication, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, Vol: 213, Pages: 405-416, ISSN: 1350-6501
- Author Web Link
- Cite
- Citations: 35
Cann PME, Lubrecht AA, 1999, An analysis of the mechanisms of grease lubrication in rolling element bearings, Lubrication Science, Vol: 11, Pages: 227-245, ISSN: 0954-0075
Cann PME, Lubrecht AA, 1999, Analysis of grease lubrication in rolling element bearings, Lubrication Science, Vol: 11, Pages: 227-245, ISSN: 0954-0075
Yin J, Eissa KI, Gohar R, et al., 1999, Rebounding lubricant layers, Lubrication Science, Vol: 12, Pages: 3-30, ISSN: 0954-0075
Jacod B, Pubilier F, Cann PME, et al., 1999, Track replenishment in and out of contact, 25th Leeds-Lyon Symposium on Tribology, Pages: 483-492
Hurley S, Cann PME, 1999, IR spectroscopic analysis of grease lubricant films in rolling contacts, Lubrication at the Frontier, Editors: Dowson, Priest, Taylor, Ehret, Childs, Dalmaz, Berthier, Flamand, Georges, Lubrecht, Publisher: Elsevier, Pages: 589-600, ISBN: 9780444502674
Hurley S, Cann PME, 1999, The influence of grease composition on film thickness in rolling contacts, NLGI Spokesman (National Lubricating Grease Institute), Vol: 63, Pages: 12-22, ISSN: 0027-6782
Merieux JS, Hurley S, Lubrecht AA, et al., 1999, Shear degradation of grease and base oil availability in starved EHL lubrication, 26th Leeds-Lyon Symposium on Tribology, Publisher: Elsevier, Pages: 581-588, ISSN: 0167-8922
Cann PME, 1999, Thin-film grease lubrication, Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, Vol: 213, Pages: 405-416, ISSN: 1350-6501
Hurley S, Cann PM, 1999, IR spectroscopic analysis of grease lubricant films in rolling contacts, 25th Leeds-Lyon Symposium on Tribology, Publisher: ELSEVIER SCIENCE BV, Pages: 589-600
- Author Web Link
- Cite
- Citations: 17
Jacod B, Pubilier F, Cann PME, et al., 1999, An analysis of track replenishment mechanisms in the starved regime, Lubrication at the Frontier, Editors: Dowson, Priest, Taylor, Ehret, Childs, Dalmaz, Berthier, Flamand, Georges, Lubrecht, Publisher: Elsevier Science, Pages: 483-492, ISBN: 9780444502674
Hurley S, Cann PME, 1999, Grease composition and film thickness in rolling contacts, NLGI Spokesman (National Lubricating Grease Institute), Vol: 63, Pages: 12-22, ISSN: 0027-6782
Chevalier F, Lubrecht AA, Cann PME, et al., 1998, Film thickness in starved EHL point contacts, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol: 120, Pages: 126-133, ISSN: 0742-4787
- Author Web Link
- Cite
- Citations: 147
Cann PME, 1998, Film thickness in starved EHL point contacts, Transactions of the ASME Journal of Tribology, Vol: 120, Pages: 126-133, ISSN: 0742-4787
Chevalier F, Lubrecht AA, Cann PME, et al., 1998, The evolution of lubricant film defects in the starved regime, Pages: 233-242, ISSN: 0167-8922
Hurley S, Cann PM, Spikes HA, 1998, Thermal degradation of greases and the effect on lubrication performance, 24th Leeds-Lyon Symposium on Tribology, Publisher: ELSEVIER SCIENCE BV, Pages: 75-83
- Author Web Link
- Cite
- Citations: 11
Lubrecht AA, Chevalier F, Cann PME, 1998, Evolution of lubricant film defects in the starved regime, 24th Leeds-Lyon Symposium on Tribology Tribology for energy conservation, Pages: 233-242, ISSN: 0167-8922
This data is extracted from the Web of Science and reproduced under a licence from Thomson Reuters. You may not copy or re-distribute this data in whole or in part without the written consent of the Science business of Thomson Reuters.