Publications
243 results found
Martinez-Botas RF, Lock GD, Jones TV, 1994, Heat transfer measurements in an annular cascade of transonic gas turbine blades using the transient liquid crystal technique, Pages: 1-8, ISSN: 0402-1215
Heat transfer measurements have been made in the Oxford University Cold Heat Transfer Tunnel employing the transient liquid crystal technique. Complete contours of the heat transfer coefficient have been obtained on the aerofoil surfaces of a large annular cascade of high pressure nozzle guide vanes (mean blade diameter of 1.11 m and axial chord of 0.0664 m). The measurements are made at engine representative Mach and Reynolds numbers (exit Mach number 0.96 and Reynolds number 2.0 × 106). A novel mechanism is used to isolate five preheated blades in the annulus before an unheated flow of air passes over the vanes, creating a step change in heat transfer. The surfaces of interest are coated with narrow-band thermochromic liquid crystals and the colour crystal change is recorded during the run with a miniature CCD video camera. The heat transfer coefficient is obtained by solving the one dimensional heat transfer equation for all the points of interest. This paper will describe the experimental technique and present results of heat transfer and flow visualisation.
Martinez-Botas RF, Main AJ, Lock GD, et al., 1993, Cold heat transfer tunnel for gas turbine research on an annular cascade, Pages: 1-6, ISSN: 0402-1215
The Oxford University Blowdown Tunnel has been substantially modified to test a large annular cascade of high pressure nozzle guide vanes (mean blade diameter of 1.11 m and axial chord of 0.0673 m). The new transonic facility has been constructed to obtain complete contours of heat transfer coefficient for both the end walls and blade surfaces using the transient liquid crystal technique, to measure pressure distributions and losses, and to study fundamental aspects of boundary layers and secondary flows. The facility allows an independent variation of Reynolds and Mach numbers, providing aerodynamic and heat transfer measurements in the region of interest for gas turbine design. The mass flow rate through the cascade at NGV design conditions (exit Mach number 0.96 and Reynolds number 2.0 × 106) is 38 kg/s and the pressure-regulated test duration exceeds 7 seconds.
Martinez-Botas RF, Main AJ, Lock GD, et al., 1993, A cold heat transfer tunnel for gas turbine research on an annular cascade
The Oxford University Blowdown Tunnel has been substantially modified to test a large annular cascade of high pressure nozzle guide vanes (mean blade diameter of 1.11 m and axial chord of 0.0673 m). The new transonic facility has been constructed to obtain complete contours of heat transfer coefficient for both the end walls and blade surfaces using the transient liquid crystal technique, to measure pressure distributions and losses, and to study fundamental aspects of boundary layers and secondary flows. The facility allows an independent variation of Reynolds and Mach numbers, providing aerodynamic and heat transfer measurements in the region of interest for gas turbine design. The mass flow rate through the cascade at NGV design conditions (exit Mach number 0.96 and Reynolds number 2.0 × 106) is 38 kg/s and the pressure-regulated test duration exceeds 7 seconds.
This data is extracted from the Web of Science and reproduced under a licence from Thomson Reuters. You may not copy or re-distribute this data in whole or in part without the written consent of the Science business of Thomson Reuters.