Imperial College London

DrSundayPopo-Ola

Faculty of EngineeringDepartment of Civil and Environmental Engineering

Research and Teaching Fellow
 
 
 
//

Contact

 

s.popoola Website

 
 
//

Location

 

320Skempton BuildingSouth Kensington Campus

//

Summary

 

Publications

Publication Type
Year
to

112 results found

Taleongpong P, Hu S, Jiang Z, Wu C, Popo-Ola S, Han Ket al., 2020, Machine learning techniques to predict reactionary delays and other associated key performance indicators on British railway network, Journal of Intelligent Transportation Systems: technology, planning, and operations, Vol: 2020, Pages: 1-19, ISSN: 1547-2450

Reactionary delays that propagate from a primary source throughout train journeys are an immediate concern for British railway systems. Complex non-linear interactions between various spatiotemporal variables govern the propagation of these delays which can avalanche throughout railway network causing further severe disruptions. This paper introduces several machine learning (ML) techniques alongside data mining processes to create a framework that predicts key performance indicators (KPIs), reactionary arrival delay, reactionary departure delay, dwell time and travel time. The frameworks in this paper provide greater accuracy in predicting KPIs through state-of-the-art ML models compared to existing delay prediction systems. Further discussion on the improvements, applicability and scalability of this framework are also provided in this paper.

Journal article

Degtyareva N, Gatheeshgar P, Poologanathan K, Gunalan S, Lawson M, Popo-Ola Set al., 2019, Combined bending and shear behaviour of slotted perforated steel channels: numerical studies, Journal of Constructional Steel Research, Vol: 161, Pages: 369-384, ISSN: 0143-974X

Cold-formed steel studs and purlins with staggered slotted perforations in webs are used in building structures to produce a better thermal performance of the profiles and for the energy efficiency of structures. On the other hand, the slotted webs result in an unfavourable effect in terms of the structural performance of the element, prominently their shear, bending and combined bending and shear strengths. Relatively little research has been reported on this subject despite its importance. Many research studies have been undertaken to examine the behaviour of conventional cold-formed steel (CFS) channel sections subject to combined bending and shear. To date, however, no research has been carried out to investigate how CFS channels with staggered slotted perforations behave under combined bending and shear actions. An extensive study on this area is therefore essential. Finite element (FE) models of CFS channels with staggered slotted perforations were developed to investigate their combined bending and shear capacity. A parametric study was conducted in detail by developing FE models based on the validation process with available experimental data. This paper presents the FE analysis details of CFS channels with staggered slotted perforations subject to combined bending and shear actions and the FE results. New design equations were also proposed to predict the combined bending and shear capacity of steel channels with staggered slotted perforations.

Journal article

Lawson RM, Lim JBP, Popo-Ola SO, 2013, Pull-out forces in shear connectors in composite beams with large web openings, JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, Vol: 87, Pages: 48-59, ISSN: 0143-974X

Journal article

Way AGJ, Popo-Ola SO, Biddle AR, Lawson RMet al., 2009, Durability of Light Steel Framing in Residential Building, UK, Publisher: The Steel Construction Institute, ISBN: 9781859421932

Book

Lawson RM, Ogden RG, Pedreschi R, Popo-Ola SOet al., 2008, Developments of Cold-Formed Steel Sections in Composite Applications for Residential Buildings, ADVANCES IN STRUCTURAL ENGINEERING, Vol: 11, Pages: 651-660, ISSN: 1369-4332

Journal article

Lawson PM, Byfield MP, Popo-Ola SO, Grubb PJet al., 2008, Robustness of light steel frames and modular construction, PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, Vol: 161, Pages: 3-16, ISSN: 0965-0911

Journal article

Lawson RM, Ogden RG, Pedreschi R, Popo-Ola SOet al., 2005, Pre-fabricated systems in housing using light steel and modular construction, Journal of Steel Structures, Vol: 5, Pages: 477-483, ISSN: 1598-2351

Journal article

Lawson RM, Chung KF, Popo-Ola SO, 2002, Structural design to BS 5950-5:1998 section properties and load tables, SCI Publication, ISSN: 1367-630X

Journal article

Lawson RM, Chung KF, Popo-Ola SO, 2002, Structural design to BS 5950-5:1998 : section properties and load tables, Steel Construction Institute, Publisher: SCI Publication, ISBN: 9781859421192

Book

Lawson M, Popo-ola S, 2001, Modular construction with light steel, New Steel Construction, Vol: 9, Pages: 21-23, ISSN: 0968-0098

Journal article

Popo-Ola SO, Lawson RM, Sullivan PJ, 2001, Over-cladding of existing concrete buildings using cold formed light steel sections and composite cladding panels, RILEM, Connections between steel and concrete, international symposium, Stuttgart, Germany, 2001, Publisher: France, Pages: 867-876

Conference paper

Popo-Ola SO, Pavlovic MN, Clarke L, 2001, Testing of precast deck panels for the A2/M2 Cobham to J4 widening - Phase I, WS Aitkins Transportation Engineering and Highway Agency., RT-01-01

Report

Lawson RM, Popo-Ola SO, Varley DN, 2001, Innovative development of light steel composites in buildings, RILEM, Connections between steel and concrete, international symposium, Stuttgart, Germany, 2001, Publisher: France, Pages: 1382-1391

Conference paper

Lawson RM, Popo-Ola SO, 2000, Case Studies on Light Steel Framing (Second Series - B), Light Steel Series, Publisher: The Steel Construction Institute, SCI-P-276-B

Report

Popo-Ola SO, Nethercot DA, 2000, Design Tools and New Applications of Cold Formed Steel in Buildings: Steel-Board Composite Tests, Report submitted to The Steel Construction Institute, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. SPo/RT-20-15

Report

Popo-Ola SO, 2000, Expansion Bolt Project Final Technical Report, Final Technical Report submitted to CEC Brite-Euram Cooperative Research Council, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. FTR

Report

Popo-Ola SO, Lawson RM, 2000, Push-out Tests with Matrex Bolted Channel Connector and Fibre Reinforced Concrete, Report submitted to Terrapin Limited, Publisher: Steel Construction Institute, SCI Report No.RT-794

Report

Popo-Ola SO, 2000, Push-out Tests on CF70 decking System with Welded Shear Connector in Normal Weight and Lightweight Concretes, Report submitted to Steel Construction Institute, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. RT-99-9

Report

Popo-Ola SO, Clark L, 2000, Testing of HAZ HB01 Sleeve Anchors size M6, M8 and M10 in Conrete and Dense Aggregate Blocks, Report submitted to HAZ International Limited, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. SPo/RT-00-09

Report

Popo-Ola SO, Biddle AR, Lawson RM, 2000, Durability of Cold Formed Steel Sections in Housing and other Applications, Publisher: The Steel Construction Institute, ISBN: 9781859421116

Book

Popo-Ola SO, Lawson RM, 2000, Testing of SD225 Steel Decking (S 350) with Reduced End Bearing, Report submitted to PMF and Corus, Publisher: Steel Construction Institute, SCI Report No.RT-805

Report

Popo-Ola SO, 2000, Expansion Bolt Project 2nd Six Months Progress Report, Report submitted to CEC Brite-Euram Cooperative Research Council, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. EBP-6MR2

Report

Popo-Ola SO, Clark L, 2000, Testing of HAZ HB03 Through Bolt Anchors size M6, M8, M10 and M12 in Accordance with European Organisation Technical Approval (EOTA) Guideline, ETAG No. 001, 1997, Report submitted to HAZ International Limited, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. SPo/RT-00-01

Report

Popo-Ola SO, 2000, Testing of APT Anchors size M6, M8, M10 and M12 in Accordance with European Organisation Technical Approval (EOTA) Guideline, ETAG No. 001, 1997, Report submitted to AP Technik Limited, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. SPo/RT-20-3

Report

Popo-Ola SO, 2000, Site Visits to Existing Modular Buildings Constructed with Cold formed Steel Sections, Report submitted to Corus, Publisher: Steel Construction Institute, SCI Report No.RT-815

Report

Popo-Ola SO, Lawson RM, 1999, UltraZed Accreditation Test Report, Report submitted to Structural Sections Limited, Publisher: Steel Construction Institute, SCI report SCI-RT-734

Report

Popo-Ola SO, 1999, Expansion Bolt Project: 1st Quarter Progress Report, 1st Quarter Progress Report submitted to McAlpine & Co. Ltd, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. EBP-RT1

Report

Popo-Ola SO, 1999, Expansion Bolt Project: Six Months Progress Report, Six Months Progress Report submitted to CEC Brite-Euram Cooperative Research Council, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. EBP-6MR1

Report

Lawson RM, Popo-Ola SO, 1999, Demonstration of Steel in Housing and in Over-Cladding using Light Steel Framing, Final report submitted to The Commission of European Communities (ECSC), Publisher: Steel Construction Institute, SCI report SCI-RT-724

Report

Lawson RM, Popo-Ola SO, 1999, Case Studies on Modular Steel Framing, Light Steel Series, Publisher: The Steel Construction Institute, SCI-P-271

Report

This data is extracted from the Web of Science and reproduced under a licence from Thomson Reuters. You may not copy or re-distribute this data in whole or in part without the written consent of the Science business of Thomson Reuters.

Request URL: http://wlsprd.imperial.ac.uk:80/respub/WEB-INF/jsp/search-html.jsp Request URI: /respub/WEB-INF/jsp/search-html.jsp Query String: respub-action=search.html&id=00100242&limit=30&person=true