Publications
112 results found
Popo-Ola SO, 1996, Testing of Spit Express Tie to DD140 Parts 1 & 2: 1986/87, Report submitted to Spit Fixings (A division of ITW Limited), Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-96-4
Hobbs RE, Popo-Ola SO, 1996, Test Series G: Load Introduction Tests on U Sections: Design rules for steel sheet piles for Eurocode 3 Part 5, Report submitted to The Commission of European Communities (ECSC), Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-96-2/3
Popo-Ola SO, Lawson RM, 1996, Colour Modelling of Overclad Buildings, Semester report submitted to The Commission of European Communities (ECSC), Publisher: Steel Construction Institute, Report SCI-RT-559
Atkin BL, Davies BL, Popo-Ola SO, et al., 1996, Robotic Fixing For Cladding, Final report to the Engineering & Physical Science Research Council (EPSRC), Publisher: Dept. of Civil Engineering, ICSTM, Grant Award No. GR/H/46374
Wing RD, Popo-Ola SO, Atkin BL, 1996, Visualisation Technique for Robotic Component Connections Systems, 13th International Symposium on Automation and Robotics in Construction (ISARC), Tokyo, Pages: 285-291
Popo-Ola SO, 1996, Cold Formed Steel Support Systems in the Over/Re-Cladding of Concrete Buildings, London, Publisher: University of London
Popo-Ola SO, Chana PS, 1996, Tilt-up Construction of Sandwich Insulated Walls for Lowrise Industrial Retail and Office Buildings: Design, Analysis and Construction of Panel, Report submitted to the Reinforced Concrete Council, Project No. CRIC/95/003/03, Publisher: Concrete Research and Innovation Centre, ICSTM, Report No. RT-96/003564
Popo-Ola SO, Lawson RM, Pedreschi RF, 1996, Monitoring of Prototype Overcladding Panels, Report submitted to ECSC, Publisher: Steel Construction Industry, SCI report SCI-RT-564
Hobbs RE, Davidson PC, Popo-Ola SO, 1996, Test Series B: Oblique Bending Tests on U Sections: Design rules for steel sheet piles for Eurocode 3 Part 5, Final report submitted to The Commission of European Communities (ECSC), Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-96/1
Popo-Ola SO, 1996, Tests on (PMF) CF210 (FeE 280) Steel Decking for Canadian Projects, Report submitted to Canada Steel Manufacturing (CSM), A division of Britidh Steel Canada Inc, SCI report SCI-RT-555
Popo-Ola SO, Newman JB, 1996, Tests on Hilti HSL Anchors in Cracked and Non-cracked Concrete in accordance with ETA Guideline (Draft 1994): Characteristic load for tension and shear not influenced by edge and spacing effects, Report submitted to Hilti Entwicklungs-GmbH, Germany, Publisher: Dept. of Civil Engineering, ICSTM, Report No. RT-96-3/5
Popo-Ola SO, Mullett D, 1996, Push-out Tests on Pneutek Shear Connector Systems, Report submitted to Pneutek (Europe) Limited, Publisher: Steel Construction Institute, SCI report SCI-RT-595
Hobbs RE, Popo-Ola SO, 1996, Test Series on G and L Sheet Piles: Load Introduction Tests on U and Z Sections: Design rules for steel sheet piles for Eurocode 3 Part 5, Report submitted to The Commission of European Communities (ECSC), Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-96-2/1
Popo-Ola SO, 1996, Tensile Tests with Single Anchors in Non-Cracked Concrete: Failure Mode Splitting - Influence of Bendig, Height, Width and Eccentricity Effects, Publisher: IWB, Universit"t of Stuttgart, Germany
Popo-Ola SO, 1996, Shear Tests on Hilti HSL Anchors in Non-cracked Concrete in accordance with ETA Guideline (Draft 1994): Characteristic load for shear not influenced by edge and spacing effects, Report submitted to Hilti Entwicklungs-GmbH, Germany, Publisher: Dept. of Civil Engineering, ICSTM, Report No. RT-96-3/6
Popo-Ola SO, 1995, Wind Load Tests of Over-Cladding Steel System, Fourth Pacific Structural Steel Conference, Singapore, Pages: 629-636
Popo-Ola SO, 1995, Steel Over-Cladding System using Composite panels and Cold-formed sub-frame, Fourth Pacific Structural Steel Conference. Singapore, Pages: 285-291
Popo-Ola SO, Newman JB, 1995, Testing of Excalibur Screwbolts to UEAtc M.O.A.T No. 49: 1992, Report submitted to P. A. Fixings Limited, Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-95/2
Popo-Ola SO, 1995, Tensile Tests with Single Anchors in Non-cracked Concrete - Failure mode Splitting: Influence of bending, height, width and eccentricity effects, Report submitted to the Scientific Board Committee on Anchorage, IWB, Universit"t of Stuttgart, Germany, Publisher: Dept. of Civil Engineering., ICSTM, Report No. 16/15-95/18
Popo-Ola SO, Newman JB, 1995, Centric Tensile Tests of Bonded Anchors in Non-cracked Concrete - Influence of edge distances and corner effects, Report submitted to the Scientific Board Committee on Anchorage, IWB, Universit"t of Stuttgart, Germany, Publisher: Dept. of Civil Engineering, ICSTM, Report No. 20/3-95/17
Popo-Ola SO, 1995, Development of Over-Cladding Steel System using Cold-formed sub-frame and Composite panels, Conference on Structural Stability & Design, Sydney, Australia, Pages: 496-501
Popo-Ola SO, 1995, Cold-formed Steel Cladding Sub-frame in Re-Clad of Buildings, Fourth Pacific Structural Steel Conference, Singapore, Pages: 277-284
Hobbs RE, Davidson PC, Popo-Ola SO, 1995, Test Series B: Oblique Bending Tests on U Sections: Design rules for steel sheet piles for Eurocode 3 Part 5, Interim report submitted to The Commission of European Communities (ECSC), Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-95/4
Popo-Ola SO, 1995, Testing of Excalibur Screwbolts to ASTM E-488: 1990, Report submitted to P. A. Fixings Limited, Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-95/3
Popo-Ola SO, Davidson PC, 1995, Re-cladding of Buildings using Cold-formed steel sub-frame, International Conference on Structural Stability & Design, Sydney, Pages: 491-495
Popo-Ola SO, Newman JB, 1994, Tensile and Shear Tests of HSL Anchors in Cracked and Non-cracked Concrete, Report submitted to the Scientific Board Committee on Anchorage, IWB, Universit"t of Stuttgart, Germany, Publisher: Dept. of Civil Engineering, ICSTM, Report No. 1/62-94/8
Popo-Ola SO, 1994, Research into Anchorages Technology at Imperial College, The Institution of Civil Engineers Seminar on Concrete Capacity Method of Load Calculation of Anchorages in Concrete, London
Popo-Ola SO, Davidson PC, Sullivan PJE, 1994, Steel Cladding Systems in Re/Over-clad of Buildings, International Conference on Building Envelope Systems and Technology, Singapore, Pages: 51-56
Popo-Ola SO, 1994, Durability of Fixings behind a Cladding Environment, Report submitted to the Scientific Board Committee on Anchorage, IWB, Universit"t of Stuttgart, Germany, Publisher: Dept. of Civil Engineering, ICSTM, Report No. 1/63-94/9
Popo-Ola SO, 1994, Steel Recladding of Existing Buildings, Transfer report: Mphil to PhD, Publisher: Dept. of Civil Engineering, ICSTM, Report No. LINK/SiR-RT-13
This data is extracted from the Web of Science and reproduced under a licence from Thomson Reuters. You may not copy or re-distribute this data in whole or in part without the written consent of the Science business of Thomson Reuters.