Publications
112 results found
Popo-Ola SO, Lawson RM, 1999, Test Report on UltraZed Heavy End Bay Purlin Systems, Report submitted to Structural Sections Limited, Publisher: Steel Construction Institute, SCI report SCI-RT-725
Popo-Ola SO, 1999, Shear Tests on Hilti HSL-G Anchors with Slitted Distance Sleeve in Cracked and Non-cracked Concrete in accordance with ETA Guideline (ETA 001, 1997): Characteristic shear resistance in cracked and non-cracked concrete not influenced by edge and spacing effects, Report submitted to Hilti Entwicklungs-GmbH, Germany, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. RT-99-8/8
Popo-Ola SO, 1999, Expansion Bolt Project: 2nd Quarter Progress Report, Progress Report submitted to McAlpine & Co. Limited, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. EBP-QR2
Popo-Ola SO, Lawson RM, 1998, Push-out Tests with Strip (Profiled) Shear Connectors fastened with Hilti X-EDNK22 pins into Cold Formed Steel Sections, Report submitted to Hilti Corporate Research, Schaan, Principality of Leichtenstein, Switzerland, Publisher: Steel Construction Institute, SCI report SCI-RT-693
Popo-Ola SO, Lawson RM, 1998, Full-scale Test on Matrex Composite Floor System using Top-hat Strip Connectors fastened with Hilti X-EDNK22 pins, Report submitted to Terrapin Limited, Publisher: Steel Construction Institute, SCI report SCI-RT-704
Popo-Ola SO, 1998, Testing of AP Technik M10/80 Screwbolts to UEAtc M.O.A.T No. 49: 1992, Report submitted to AP Technik Limited, Publisher: Dept. of Civil & Environmental Engineering , ICSTM, Report No. SPo/RT-98/9
Lawson RM, Pedreschi RF, Popo-Ola SO, 1998, Over-cladding of Existing Buildings using Light Steel, Publisher: The Steel Construction Institute, ISBN: 9781859420843
Popo-Ola SO, 1998, Concrete Capacity Method (CCM) for Design of Anchorages, Publisher: Queen Mary & Westfield College, London
Lawson RM, Popo-Ola SO, Pedreschi RF, 1998, Design of Over-cladding Systems to Existing Building, Second World Conference on Steel Construction, San Sebastian, Spain, Publisher: Elsevier Science Ltd
Popo-Ola SO, 1998, Testing of Excalibur M20/200 Screwbolts to UEAtc M.O.A.T No. 49: 1992, Report submitted to P. A. Fixings Limited, Publisher: Dept. of Civil & Environmental Engineering, ICSTM, Report No. SPo/RT-98/3
Popo-Ola SO, 1998, Testing of Hummel Expansion Anchor Bolts M6/35 to UEAtc M.O.A.T No. 49: 1992, Report submitted to Lumberjack Limited, Dept. of Civil & Environmental Engineering, ICSTM, Report No. SPo/RT-98/1
Popo-Ola SO, Lawson RM, Pedreschi RF, 1998, Over-cladding of Existing Buildings Using Composite Steel Panels, Final report to Mega 5 Project: submitted to The Commission of European Communities (ECSC), Publisher: Steel Construction Institute, Report SCI-RT-687
Popo-Ola SO, 1997, Composite Construction with Cold Formed Steel Sections, Report submitted to British Steel (Strip Products), Publisher: Steel Construction Institute, SCI report SCI-RT-650
Popo-Ola SO, 1997, QA Tests on Hilti HSL Anchors in Cracked and Non-cracked Concrete in accordance with ETA Guideline (Draft 1994): Characteristic load for tension and shear not influenced by edge and spacing effects, Report submitted to Hilti Industries (GB) Limited, Publisher: Dept. of Civil Engineering, ICSTM, Report No. RT-97-2/1
Popo-Ola SO, 1997, Research into Anchorages Technology at Imperial College, Fischer 1997 European Lecture Tour: The Design of Steel Anchors in Accordance with EOTA Guidelines, Publisher: Department of Civil Engineering, Imperial College of Science, Technology & Medicine, London
Popo-Ola SO, 1997, Shear Tests with Anchors Group, Publisher: IWB, Universit"t of Stuttgart, Germany
Lawson RM, Popo-Ola SO, 1997, Case Studies on Light Steel Framing (First Series - A), Light Steel Series, Publisher: The Steel Construction Institute, SCI-P-276-A
Popo-Ola SO, 1997, Testing of Excalibur M16/150 Screwbolts to UEAtc M.O.A.T No. 49: 1992, Report submitted to P. A. Fixings Limited, Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-97/3
Popo-Ola SO, 1997, Centric Tensile Tests of Bonded Anchors in Non-cracked Concrete - Influence of edge distances, Report submitted to the Scientific Board Committee on Anchorage, IWB, Universit"t of Stuttgart, Germany, Publisher: Dept. of Civil Engineering, ICSTM, Report No. 20/9-97/2
Davidson PC, Popo-Ola SO, 1997, Modelling Concrete Anchors in the Analysis of Steel Sub-Frames in the Re-Cladding of Buildings, International Conference on Building Envelope Systems and Technology, Bath, United Kingdom, Pages: 135-140
Lawson RM, Ogden RG, Popo-Ola SO, 1997, Demonstration of Light Steel Framing in Student Residence at Oxford Brookes University, Light Steel Framing Series, Publisher: The Steel Construction Institute, SCI-P-171
Popo-Ola SO, Newman JB, 1997, Shear Tests with Anchor Groups in Non-cracked Concrete - Pryout Failure Mode : Influence of edge and spacing effects, Report submitted to the Scientific Board Committee on Anchorage, IWB, Universit"t of Stuttgart, Germany, Publisher: Dept. of Civil Engineering, ICSTM, Report No. 10/26-97/3
Grubb PJ, Popo-Ola SO, Lawson RM, 1997, Testing of Light Steel Framed House, Report submitted to ECSC and British Steel, Publisher: Steel Construction Institute, SCI report SCI-RT-673
Lawson RM, Popo-Ola SO, 1997, Design Tables and Graphs for Composite Beams to EC4, ECCS Publication submitted to ECCS Technical Committee, Publisher: ECCS
Popo-Ola SO, 1997, Tensile Tests of Hilti HVA Parapet Anchors in Non-cracked Concrete in accordance with ETA Guideline (Draft 1994): Characteristic load for tension not influenced by edge and spacing effects, Report submitted to Hilti (Great Britain) Limited, Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-97/1
Popo-Ola SO, Lawson RM, Gray RF, 1997, Durability of Cold Formed Steel Sections in Housing and other Applications, Report submitted to British Steel (Strip Products), Publisher: Steel Construction Institute, SCI report SCI-RT-651
Popo-Ola SO, 1996, Tests on (PMF) CF210 Steel Decking, Report submitted to Dutch Engineering, Publisher: Steel Construction Institute, SCI report SCI-RT-576
Eggersmann B, Popo-Ola SO, Hobbs RE, 1996, Plastic Design of Steel Sheet Piles: Finite Element Investigation of U and Z Sections: Design rules for steel sheet piles for Eurocode 3 Part 5, Report submitted to The Commission of European Communities (ECSC), Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-96-2/2
Hobbs RE, Popo-Ola SO, 1996, Test Series on G9, G10, L9 and L10 Sheet Piles: Load Introduction Tests on U and Z Sections: Design rules for steel sheet piles for Eurocode 3 Part 5, Report submitted to The Commission of European Communities (ECSC), Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-96/4
Popo-Ola SO, 1996, Summary of Tests on Spit Express Tie to DD140 Parts 1 & 2: 1986/87, Summary report submitted to Spit Fixings (A division of ITW Limited), Publisher: Dept. of Civil Engineering, ICSTM, Report No. SPo/RT-96-5
This data is extracted from the Web of Science and reproduced under a licence from Thomson Reuters. You may not copy or re-distribute this data in whole or in part without the written consent of the Science business of Thomson Reuters.