Imperial College London
Portrait Picture

Dr Saif Z. S. Al Ghafri

Faculty of Engineering, Department of Chemical Engineering

Honorary Research Fellow
 
 
 
//

Contact

 

+44 (0)20 7594 1227saif.al-ghafri06

 
 
//

Location

 

231ACE ExtensionSouth Kensington Campus

//

Summary

 

Publications

Citation

BibTex format

@article{Xiao:2021:10.1016/j.fuel.2021.120668,
author = {Xiao, X and Al, Ghafri SZS and Rowland, D and Hughes, TJ and Hnedkovsky, L and Hefter, G and May, EF},
doi = {10.1016/j.fuel.2021.120668},
journal = {Fuel},
title = {Isobaric heat capacity measurements of natural gas model mixtures (methane + n-heptane) and (propane + n-heptane) by differential scanning calorimetry at temperatures from 313 K to 422 K and pressures up to 31 MPa},
url = {http://dx.doi.org/10.1016/j.fuel.2021.120668},
volume = {296},
year = {2021}
}
Download

RIS format (EndNote, RefMan)

TY  - JOUR
AB  - Heat capacities of pure methane (1), propane (2) and n-heptane (3), and binary mixtures of (methane or propane + n-heptane) at n-heptane mole fractions of (0.070 to 0.750), were measured at temperatures (313 to 42) K and pressures (6.00 to 31.10) MPa using a Tian-Calvet-type differential scanning calorimeter with a combined standard uncertainty of (2.20 to 2.68) % (k = 1). The results for pure methane, propane and n-heptane agreed within 2% of the values calculated from reference equations of state (EOS). In contrast, for the two sets of mixtures measured above their cricondenbars, averaged absolute deviations of 4.6%, 3.7% and 1.2% were observed between the measured cp values and those predicted by the GERG-2008, Peng-Robinson (PR) and SAFT-γ Mie EOS, respectively. The divergences of cp from model calculations for the binary mixtures near the critical region were also investigated. The root mean square (r.m.s.) deviations of the measured heat capacities from those calculated using the GERG-2008, PR, and SAFT-γ Mie exhibited relatively large but similar values of 7.1%, 7.4% and 7.2% for [0.850 CH4 + 0.150 n-C7H16] and 9.1%, 6.9% and 8.0% for [0.930 C3H8 + 0.070 n-C7H16]. This work reveals that the SAFT-γ Mie EOS can adequately describe most heat capacity data above the cricondenbar, while none of the models provide reliable predictions near the critical region.
AU  - Xiao,X
AU  - Al,Ghafri SZS
AU  - Rowland,D
AU  - Hughes,TJ
AU  - Hnedkovsky,L
AU  - Hefter,G
AU  - May,EF
DO  - 10.1016/j.fuel.2021.120668
PY  - 2021///
SN  - 0016-2361
TI  - Isobaric heat capacity measurements of natural gas model mixtures (methane + n-heptane) and (propane + n-heptane) by differential scanning calorimetry at temperatures from 313 K to 422 K and pressures up to 31 MPa
T2  - Fuel
UR  - http://dx.doi.org/10.1016/j.fuel.2021.120668
VL  - 296
ER  -
Download