TY - JOUR AB - Because the viscosities of engine and transmission lubricants are lowered in order to reduce hydrodynamic friction and thus energy consumption, it is important to ensure that wear rates do not increase and thus machine durability is not impaired. In practical terms this means that we require reliable methods for measuring the mild wear rates present in most lubricated machine components.This article compares three mild wear reciprocating laboratory tests, one based on the high-frequency reciprocating rig (HFRR) and two on the mini-traction machine (MTM), in order to explore the extent to which wear rate is determined by the test configuration. The results show that some additive-containing lubricants including blends of antiwear additive and dispersant give quite consistent wear rates, independent of whether the surface is in continuous or intermittent contact, whereas others such as two friction modifiers do not. Possible reasons for these differences are discussed. The importance of accounting for wear during running-in and the need to remove any thick tribofilms present before quantifying wear volume are also confirmed. AU - Zhang,J AU - Yamaguchi,E AU - Spikes,H DO - 10.1080/10402004.2013.807530 EP - 928 PY - 2013/// SN - 1040-2004 SP - 919 TI - Comparison of three laboratory tests to quantify mild wear rate T2 - Tribology Transactions UR - http://dx.doi.org/10.1080/10402004.2013.807530 UR - https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000324614500003&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=a2bf6146997ec60c407a63945d4e92bb UR - https://www.tandfonline.com/doi/full/10.1080/10402004.2013.807530 VL - 56 ER -