EEE studentsUCAS code: H604
ECTS: 246/270*
Start date: October 2017
Duration: 4 years full-time

LocationSouth Kensington

Our four-year MEng Electrical and Electronic Engineering course focuses on the design and application of large and small scale electronic systems to process and transmit energy and information. 

You will be taught by experts in their field, who bring industrial expertise to the classroom.

The course is both theoretical and practical, aiming to ensure graduates can apply engineering to real world situations.

* dependent on whether you choose an industrial placement, or the individual project alternative

About the course


We believe the key to success is to understand the subject at a fundamental level and so we place great importance on teaching you the underpinning analytical base of electrical and electronic engineering from the start.

Our MEng Electrical and Electronic Engineering course aims to prepare high quality graduates who will innovate beyond the current practises.

You can expect to complete your studies well prepared to enter a variety of relevant industries, including:

  • Electronic/ Electrical industry
  • Information technology industry
  • Research
  • Commercial industries

You will receive training in the fundamental principles of mathematics and electrical and electronic engineering, where you will develop a firm grasp of the intrinsic concepts.

There is an emphasis on modelling, enabling you to analyse and optimise systems by modelling them.

You are encouraged and expected to participate in an industrial based project, ensuring the development of crucial practical experience.

During your studies you will develop competency in computing, with a specific focus on programming and an opportunity to utlise the latest computing technologies.

You will be encouraged to innovate, and incorporate design concepts to new products and processes.

The first two years of our courses follow a similar programme of studies, after which you will have the flexibility to choose from a wide range of optional modules, allowing you to specialise in your areas of interest.

The fourth year of study is at Master's level, providing the opportunity to complete an intergrated programme of studies at Bachelor's level and Master's level, all within four years.

Which degree is right for me?

If you are unsure which of our degrees is right for you, the common first and second years give you the opportunity to make your final choice of degree programme at the end of the second year, subject to satisfactory performance.

The four-year MEng with Management degree prepares future engineering leaders to manage the business of engineering. Management stream students study core modules taught by the Business School.

Our Year Abroad course gives you the opportunity to immerse yourself in a different culture, practise and refine your language skills, and broaden your horizons and academic knowledge by spending the fourth year of your course at an overseas university.

See our other courses.


Modules shown are for the current academic year, and are subject to change depending on your year of entry.

You will cover core modules in the first year, core and optional modules in the second year, industrial placement and optional modules in the third year, and an individual project and an extensive choice of over 40 optional Master's level modules.

In each year you will complete a project, adding a vital practical element to the course.

Year 1

You take 11 core modules, supported by study groups and experiments in the electrical and computer laboratories. The modules are assessed by written examinations in the summer term.

The first year project establishes the basis of the engineering design process. You begin by deconstructing a simple electronic toy and using a circuit simulation program to understand how it works. You then propose and design some enhancements to the toy and try them in the circuit simulator. Finally, you build your chosen design and test it in competition with other groups.

In order to pass the first year, you must achieve 40% in each of the examined modules, and an average of 40% across practical work.

Core modules
  • Analysis of Circuits
  • Digital Electronics 1
  • Semiconductor Devices
  • Analogue Electronics 1
  • Energy Conversion
  • Introduction to Signals and Communications
  • Software Engineering 1: Introduction to Computing
  • Mathematics I
  • Professional Engineering
  • Electronics Lab
  • Design and Build Project

Year 2

You take 12 compulsory and two optional modules, which are assessed by written examination in the summer term.

You propose your own ideas for the second year group project, which will lead to the solution of a current socio-economic problem by technical means.

In order to pass the second year, you must achieve 40% in each of the examined modules, except Mathematics II where the pass mark is 50%. In addition you must average at least 50% in examinations, and average 40% in practical work.

Core modules
  • Digital Electronics II
  • Analogue Electronics II
  • Power Engineering
  • Communication Systems
  • Signals and Linear Systems
  • Control Engineering
  • Mathematics II
  • Algorithms and Data Structures
  • Introduction to Computer Architecture
  • Computing Lab
  • Electronics Lab
  • Design and Innovation Project
Optional modules
  • Devices
  • Fields
  • Algorithms and Complexity

Year 3

In the third year you start to design your degree course to fit your interests and skills, in consultation with your personal tutor, by choosing seven advanced optional modules and undertaking an industrial placement.

In order to pass the third year, you must achieve an average of 40% across the academic year.

Six-month industrial placement

The third year includes a six-month industrial placement as part of your degree (as an alternative to an internal project). The placement runs from April to September, allowing you to tackle significant industrial projects that help develop skills in solving real engineering problems, and provide invaluable experience of engineering as it is really practiced.

The placement is supervised by a member of staff from the company you will be working for and a member of staff from the Department. It must be related to your degree in technical, business or commercial content. Departmental staff will help you set and agree objectives for your placement, which is assessed by a written and oral report.

Students have previously enjoyed placement opportunities with:

  • Altera
  • Bang & Olufsen
  • Dialog Semiconductors
  • Goldman Sachs
  • IBM
  • Ocado Technology
Individual project alternative

You can choose to complete an individual project as an alternative to the industrial placement.

Optional modules

You will choose four modules from the first group and three modules from the second, as well as taking one humanities or business-related module.

Group 1
  • Communication Systems
  • Digital Signal Processing
  • Control Engineering
  • Mathematics for Signals and Systems
  • Advanced Electronic Devices
  • Artificial Intelligence
  • Communication Networks
  • Analogue Integrated Circuits and Systems
  • Optoelectronics
  • Electrical Energy Systems
  • Microwave Technology
  • Biomedical Electronics
Group 2
  • Digital System Design
  • VHDL and Logic Synthesis
  • Advanced Signal Processing
  • Instrumentation
  • Power Electronics
  • Real-time Digital Signal Processing
Humanities and Business

Year 4

In the fourth year you will complete an individual project and develop a specialism by choosing from an extensive list of optional modules.

In order to pass the fourth year and graduate with an honours degree, you must acheive at least 40% across the academic year and at least 40% in the group project/ industrial placement, module average and individual project.

Individual project

This provides you with the opportunity to demonstrate independence and originality, to plan and organise a large project over a long period, and to put into practice some of the techniques you have learnt throughout the course. It should be the most satisfying and inspiring piece of work in your degree.

Optional modules

You will choose six modules from over 40 optional modules on offer, and the list below gives you an idea of the areas available:

Electrical and Electronic Engineering areas
  • Analogue Electronics and Signal Processing
  • Coding Theory
  • Communication Theory
  • Computation and Networks
  • Digital Signalling Processing and Imaging
  • Embedded, Linear, and Discrete Systems
  • Information Theory
  • Integrated Circuit Design
  • Multi-body Mechanical Systems
  • Optical and Wireless Communications
  • Power System Control, Measurement and Protection
  • Radio Frequency Electronics
  • Robotics
  • Speech Processing
  • Stability and Sustainability of Systems
  • Wavelets and Applications
Computing modules
  • Graphics
  • Introduction to Bioinformatics
  • Computational Finance
  • Software Engineering for Industry
  • Intelligent Data and Probabilistic Inference
Further choices

Teaching and assessment

Our courses are taught through a combination of lectures, study groups, problem solving classes, laboratory work and projects.  As your knowledge builds, you will practise more and more ambitious project work so that by the final year you can demonstrate all your applied knowledge and invention through your individual project.

As well as traditional teaching methods, the course aims to be practical, with hardware and software laboratories, group and individual projects and an industrial placement.

Additionally you can expect 3-1 sessions, oral and poster presentations and tutorial sessions.

You are assessed by written examinations and coursework assignments, including practical elements.

Staff expertise

The majority of your modules will be taught by our academic staff, all of who are active researchers in their field.  Some subjects such as mathematics are taught by specialised teaching only staff.  Your laboratory sessions are run by academic staff who are supported by our technical staff and Graduate Teaching Assistants (GTAs).

European Credit Transfer System (ECTS)

The overall ECTS credit will depend upon whether you choose to do an industrial placement (greater ECTS credit) or project alternative (lower ECTS credit).

Key Information Set (KIS)

Details about how this course is taught and assessed are provided in the KIS (key information set).

The KIS is a set of statistics which all universities use to describe how their courses are taught and assessed. This allows students to compare similar courses at different institutions.

The KIS describes the percentage of time which students typically spend in timetabled activity and in independent study for each year of their course as well the percentage of assessment which is exams, coursework or practical. An overview of the KIS is shown in the widget at the bottom of the page and further detail (including a year-by-year breakdown) is available via Unistats.

Entry requirements

We welcome students from all over the world and consider all applicants on an individual basis. If your qualifications are not listed here, please see our academic requirements by country page, which gives the minimum entry requirements for a range of international qualifications.


Our standard A-level entry requirements are A*AA overall, to include:

  • A* in Mathematics
  • A in Physics
  • A in a third subject (see below)

The third subject can be any from the list below, but we prefer Further Mathematics.

  • Applied ICT
  • Biology
  • Chemistry
  • Computer Science
  • Computing
  • Design and Technology
  • Economics
  • Electronics
  • English Literature
  • Further Mathematics
  • Geography
  • History
  • ICT
  • Languages (Classical and Modern)
  • Music
  • Music Technology
  • Statistics
  • Technology

If your school or college does not offer Further Mathematics, you may wish to investigate your local Further Mathematics Network Centre.

Applicants are normally expected to gain these grades at first attempt (i.e. by end of Year 13). It is acceptable to re-take individual AS and A2 modules during years 12 and 13. We will consider applicants who are re-taking A-levels having taken them in Year 13 and retaking the following November or May.

Practical endorsement (practical science assessment)

If you are made an offer you will be required to achieve a pass in the practical endorsement in all science subjects that form part of the offer.

International Baccalaureate

For students studying the International Baccalaureate, we require 38 points overall, including:

  • 6 in higher level Physics
  • 6 in higher level Mathematics

Scottish qualifications

For students studying Scottish qualifications, we require AAA in Advanced Highers in Maths, Physics and a third subject.

Cambridge Pre-U

For students studying the Cambridge Pre-U, we require D2 in Mathematics, and distinction in all principal subjects. Mathematics and Physics are compulsory. Acceptable third subjects are Biology, Chemistry, Economics or Further Mathematics. We will also consider a combination of Pre-U and A2 level in Mathematics and Physics.

Other qualifications

We also accept a wide range of other qualifications and popular examples include: Scottish Advanced Highers and Cambridge Pre-U.

For information on the entry requirements for these qualifications, or for the suitability of qualifications not listed here, please contact the Department using the contact details in the green 'Find out more' box on the left of this page.

Mathematics and Physics are compulsory subjects for all entrants. We do not accept applications with BTEC Higher National Diploma or from Access courses.

English language requirement (all applicants)

All applicants must demonstrate a minimum level of English language proficiency for admission to the College.

For admission to this course, you must achieve the standard College requirement in the appropriate English language qualification. For details of the minimum grades required to achieve this requirement, please see the English language requirements for undergraduate applicants.

Selection process

We encourage applications from all who want to learn what it takes to create our future. You should have the potential to succeed in a challenging course, as demonstrated by meeting our entry grades. But we are looking beyond your raw marks for a passion in developing your knowledge and understanding of this broadest form of engineering.

In addition to your academic ability, your application will be considered on your wider profile and on an interview where possible, which will assess your potential for success in your degree choice. We will look at your personal statement and reference to understand your personal motivation, your commitment to your chosen area of study, and your broader interests.

We interview all suitable applicants. If we are considering making you an offer, and you are in the UK or EU, we will invite you to one of our interview afternoons, where you will have the opportunity to ask any questions you have about our courses and life at Imperial. You will be shown around the campus by our Department’s undergraduate students, and be interviewed by one of our academic staff.

If we are considering making you an offer and you are overseas, or unable to visit, we will arrange a telephone or Skype interview.

Tuition fees and funding

Home and EU students

2017 entry:

£9,250 per year

The UK government has confirmed that universities that have achieved a ‘meet expectations’ award – which includes Imperial – will, under the first year of the new Teaching Excellence Framework (TEF), be able to raise their fees in 2017. The rise is an inflationary amount of 2.8% to a maximum of £9,250. The measure of inflation used is RPI-X (the retail price index, excluding mortgage interest payments). You should expect the fee to increase beyond 2017 for each year that your course lasts, subject to UK government regulations on fee increases.

The UK government has also confirmed that EU students starting or continuing their studies in the 2017–18 academic year will continue to pay the Home rate of tuition fees for the duration of their course. EU students will also remain eligible for the same government funding support as they are now, including the Tuition Fee Loan. This access to government funding will continue throughout your course, even if the UK exits the EU during this time. 

Islands and overseas students

2017 entry:

£27,750 per year

Please note that the tuition fee amount you will pay may increase each year.

Government funding

The level of tuition fees you pay is based on your fee status, which we assess based on UK government legislation. Find out more about fee status assessments.

Home and EU students (with the exception of Graduate Medicine students) can apply for a Tuition Fee Loan from the Government to cover the full cost of their fees each year.

Home students may also be eligible for a Maintenance Loan to help with their living costs.

Additional costs

There may be additional costs related to your course or programme of study which have to be budgeted for in addition to tuition fees and living expenses. This section provides examples of these and it is possible that all, or some, of these will be relevant to you.

Please note that the cost figures given are based on what such costs were in previous academic years and these are likely to change year to year. However, it is useful for you to be aware of the types of things you may have to pay for and their cost in previous years.

This section details whether the additional costs are essential or optional. Essential costs are highlighted as costs that you will need to pay to fully participate and complete your studies. Optional costs are not essential to your studies and you will be free to opt out of these.

Course materials

The Department of Electrical and Electronic Engineering will provide you with the necessary materials for your study free of charge, within reason.

Industrial placement

You have the opportunity to undertake a six-month industrial placement as part of the Department's MEng degrees. The industrial placement is optional and there is a group project alternative (see Structure for more information).

The additional costs associated with the industrial placement will vary depending on where your placement is based. You should expect to budget for travel and/or accommodation, though you will also receive a salary from your host company which you can put towards these costs.

Personal Protective Equipment (PPE)

Wearing personal protective equipment is compulsory for some activities on this course. Where this applies, we will provide you with the necessary PPE free of charge.

Bursaries and scholarships

Imperial Bursary

The Imperial Bursary is available to any Imperial Home undergraduate student (except Graduate Medicine students) whose household income falls below £60,000 per year.

It is designed to ease the cost of London living by providing support on a sliding scale, from £2,000 up to £5,000 per year.

As long as your household income remains below £60,000 you will automatically qualify for a bursary for every year of undergraduate study.

The bursary is paid on top of any government loans to which you are entitled and does not need to be paid back. Find out more about the Imperial Bursary.


Our President’s Undergraduate scholarships are available to all undergraduate applicants studying an undergraduate degree for the first time who have applied to the College by 15 October.

They’re worth £1,000 for each undergraduate year of study. There are up to 112 awards available for students starting their studies in 2017–18.

A wide range of other scholarships is also available. Find out which scholarships you may be eligible for by using our scholarships search tool.

To find out more about the range of financial support available please see our Fees and Funding website.

How to apply

UCAS Apply system

To apply to study at Imperial you must use the online application system managed by the Universities and Colleges Admissions Service (UCAS).

The UCAS code for Imperial College London is I50.

Application deadlines

All applications which include choices for medicine at Imperial must be submitted to UCAS by 18.00 (UK time) on 15 October 2016 for entry in October 2017. 

The deadline for other courses at Imperial starting in 2017 is 18.00 (UK time) on 15 January 2017.

Students at a school/college registered with UCAS

All UK schools and colleges and a small number of EU and international institutions are registered with UCAS.

To make it clear which school or college you are applying from you will need to ask one of your teachers or advisers for the UCAS buzzword. You will need to enter this in UCAS’s Apply system when you register.

See our How to apply section for further guidance.

Independent applicants and students at schools/colleges not registered with UCAS

If you’re applying independently or from a school/college not registered with UCAS you will still need to use UCAS’s Apply system. You will not need a UCAS buzzword.

See our How to apply section for further guidance.

Academic Technology Approval Scheme (ATAS)

An ATAS certificate is not required for overseas students applying for this course.

For more information about the Academic Technology Approval Scheme (ATAS), please see the International Student Support website.

Tracking your application

Once you’ve completed your application and it’s been submitted through UCAS’s Apply system, you can use UCAS’ Track system to follow its progress and manage your choices.

Professional accreditation and associateship

Professional accreditation

This degree is professionally accredited by the Institution of Engineering and Technology (IET).

Imperial College London is a member of the IET's Power Academy and the UK Electronic Skills Foundation (UKESF), both of which support home students through scholarships.


This course also leads to the award of the Associateship of the City and Guilds of London Institute (ACGI).

What our graduates do

From the start of your degree course, you’ll discover how professional skills will help you become more effective as an engineer. You will be equipped to make your ideas real and to explain technical subjects to others through powerful and persuasive written and spoken presentations. We will help you understand how to rise to the challenges faced by engineering businesses.

Our graduates are highly sought after worldwide for a wide range of careers in fields such as electrical energy, circuit design, computer gaming, software development, image processing, technical consultancy, academic research, telecommunications, finance and management.

Recent graduates of the Department have become:

  • Technical Evangelist, Microsoft
  • Technology Analyst, Goldman Sachs
  • Product Development Engineer, Invertek Drives
  • Associate Product Manager, Google
  • Software Developer, Accenture

Information for offer holders for 2017

This section lists the changes that have been made to information about this course on this page since the UCAS application process opened on 1 September 2016.

All core modules are displayed on this page; the optional modules represent an indicative list of those that are likely to be available rather than all optional modules that will be offered every year. As a result, the changes recorded here only apply to the modules displayed on this page rather than all available on this course.

Find out more about the limited circumstances in which we may need to make changes to or in relation to our courses, the type of changes we may make and how we will tell you about changes we have made.

There are currently no changes to record for this course. Keep checking back for future updates.