Many Tribology Group publications are Open Access thanks to funding from the EPSRC.

Citation

BibTex format

@article{Reddyhoff:2021:10.1021/acsami.0c21918,
author = {Reddyhoff, T and Ewen, J and Deshpande, P and Frogley, M and Welch, M and Montgomery, W},
doi = {10.1021/acsami.0c21918},
journal = {ACS Applied Materials and Interfaces},
pages = {9239--9251},
title = {Macroscale superlubricity and polymorphism of long-chain n-alcohols},
url = {http://dx.doi.org/10.1021/acsami.0c21918},
volume = {13},
year = {2021}
}

RIS format (EndNote, RefMan)

TY  - JOUR
AB - Simple n-alcohols, such as 1-dodecanol, show anomalous film-forming and friction behaviors under elastohydrodynamic lubrication (EHL) conditions, as found inside bearings and gears. Using tribometer, diamond anvil cell (DAC), and differential scanning calorimetry (DSC) experiments, we show that liquid 1-dodecanol undergoes a pressure-induced solidification when entrained into EHL contacts. Different solid polymorphs are formed inside the contact depending on the temperature and pressure conditions. Surprisingly, at a moderate temperature and pressure, 1-dodecanol forms a polymorph that exhibits robust macroscale superlubricity. The DAC and DSC experiments show that superlubricity is facilitated by the formation of lamellar, hydrogen-bonded structures of hexagonally close-packed molecules, which promote interlayer sliding. This novel superlubricity mechanism is similar to that proposed for the two-dimensional materials commonly employed as solid lubricants, but it also enables the practical advantages of liquid lubricants to be maintained. When the pressure is increased, 1-dodecanol undergoes a polymorphic transformation into a phase that gives a higher friction. The DAC and DSC experiments indicate that the high-friction polymorph is an orthorhombic crystal. The polymorphic transformation pressure coincides with the onset of a dimple formation in the EHL films, revealing that the anomalous film shapes are caused by the formation of rigid orthorhombic crystals inside the contact. This is the first demonstration of a macroscale superlubricity in an EHL contact lubricated by a nonaqueous liquid that arises from bulk effects rather than tribochemical transformations at the surfaces. Since the superlubricity observed here results from phase transformations, it is continuously self-replenishing and is insensitive to surface chemistry and topology. This discovery creates the possibility of implementing superlubricity in a wide range of machine components, which would resul
AU - Reddyhoff,T
AU - Ewen,J
AU - Deshpande,P
AU - Frogley,M
AU - Welch,M
AU - Montgomery,W
DO - 10.1021/acsami.0c21918
EP - 9251
PY - 2021///
SN - 1944-8244
SP - 9239
TI - Macroscale superlubricity and polymorphism of long-chain n-alcohols
T2 - ACS Applied Materials and Interfaces
UR - http://dx.doi.org/10.1021/acsami.0c21918
UR - https://pubs.acs.org/doi/10.1021/acsami.0c21918
UR - http://hdl.handle.net/10044/1/87616
VL - 13
ER -