Imperial College London
Portrait Picture

ProfessorGuillermoRein

Faculty of Engineering, Department of Mechanical Engineering

Professor of Fire Science
 
 
 
//

Contact

 

+44 (0)20 7594 7036g.rein Website CV

 
 
//

Assistant

 

Ms Eniko Jarecsni +44 (0)20 7594 7029

 
//

Location

 

614City and Guilds BuildingSouth Kensington Campus

//

Summary

 

Publications

Citation

BibTex format

@article{Hu:2019:10.1016/j.combustflame.2019.07.046,
author = {Hu, Y and Christensen, EG and Amin, HMF and Smith, TEL and Rein, G},
doi = {10.1016/j.combustflame.2019.07.046},
journal = {Combustion and Flame},
pages = {408--417},
title = {Experimental study of moisture content effects on the transient gas and particle emissions from peat fires},
url = {http://dx.doi.org/10.1016/j.combustflame.2019.07.046},
volume = {209},
year = {2019}
}
Download

RIS format (EndNote, RefMan)

TY  - JOUR
AB  - Peat fires are a global-scale source of carbon emissions and a leading cause of regional air quality deterioration, especially in Southeast Asia. The ignition and spread of peat fires are strongly affected by moisture, which acts as an energy sink. However, moisture effects on peat fire emissions are poorly understood in the literature. Here we present the first experimental work to investigate transient gas and particle emissions for a wide range of peat moisture contents (MCs). We include drying, ignition, smouldering spread, and even flaming stages. Peat samples conditioned to different MCs were burnt in the laboratory where a suite of diagnostics simultaneously measured mass loss rate, temperature profiles, real-time concentration of 20 gas species, and size-fractioned particle mass. It was found that MC affects emissions, in addition to peat burning dynamics. An increase in MC below a smouldering threshold of 160% in dry basis leads to a decrease in NH3 and greenhouse gas emissions, including CO2 and CH4. The burning of wet peat emits more coarse particles (between 1 and 10 µm) than dry peat, especially during the ignition stage. In contrast, flaming stage emits mostly soot particles less than 1 µm, and releases 100% more fully oxidised gas species including CO2, NO2 and SO2 than smouldering. The examination of the resulting modified combustion efficiency (MCE) reveals that it fails to recongnise smouldering combustion with sufficient accuracy, especially for wet peat with MC > 120%. MCE confuses drying and flaming, and has significant variations during the ignition stage. As a result, MCE is not valid as a universal fire mode indicator used in the field. This work fills the knowledge gap between moisture and emissions, and provides a better understanding which can help mitigate peat fires.
AU  - Hu,Y
AU  - Christensen,EG
AU  - Amin,HMF
AU  - Smith,TEL
AU  - Rein,G
DO  - 10.1016/j.combustflame.2019.07.046
EP  - 417
PY  - 2019///
SN  - 0010-2180
SP  - 408
TI  - Experimental study of moisture content effects on the transient gas and particle emissions from peat fires
T2  - Combustion and Flame
UR  - http://dx.doi.org/10.1016/j.combustflame.2019.07.046
UR  - http://hdl.handle.net/10044/1/73425
VL  - 209
ER  -
Download