Imperial College London
Alternate

ProfessorWilliamJones

Faculty of Engineering, Department of Mechanical Engineering

Professor
 
 
 
//

Contact

 

+44 (0)20 7594 7037w.jones

 
 
//

Assistant

 

Ms Fabienne Laperche +44 (0)20 7594 7033

 
//

Location

 

607City and Guilds BuildingSouth Kensington Campus

//

Summary

 

Publications

Citation

BibTex format

@article{Derenchuk:1998,
author = {Derenchuk, VP and Kupper, RR and Petri, HR and Berg, GPA and Brown, RJ and Fox, WR and Friesel, DL and Hunt, W and Jones, WP and Lozowski, WR},
journal = {Proceedings of the IEEE Particle Accelerator Conference},
pages = {2737--2739},
title = {Pulsed ion source for the IUCF Cooler Injector Synchrotron},
volume = {3},
year = {1998}
}
Download

RIS format (EndNote, RefMan)

TY  - JOUR
AB  - A pulsed source of H- ions has been constructed with minimal cost and is currently being used for commissioning of the Indiana University Cyclotron Facility (IUCF) Cooler Injector Synchrotron. A commercially available duoplasmatron, previously used with the IUCF cyclotrons, was modified for pulsed operation and has produced 25 keV H- ion beams of up to 1 mA in an emittance of less than 0.38 π-mm-mrad normalized (80%) and can operate up to 10 Hz with 50 μs to 4 ms pulse length. A simple and economical pulsed high-power MOSFET circuit is used to drive the arc and the gas valve. The beam transport line to the 7 MeV RFQ-DTL, features an Einzel lens doublet immediately upstream to match the beam from the source. The design, development and performance of the ion source and beam transport line is presented.
AU  - Derenchuk,VP
AU  - Kupper,RR
AU  - Petri,HR
AU  - Berg,GPA
AU  - Brown,RJ
AU  - Fox,WR
AU  - Friesel,DL
AU  - Hunt,W
AU  - Jones,WP
AU  - Lozowski,WR
EP  - 2739
PY  - 1998///
SP  - 2737
TI  - Pulsed ion source for the IUCF Cooler Injector Synchrotron
T2  - Proceedings of the IEEE Particle Accelerator Conference
VL  - 3
ER  -
Download