Building on the success of the previous Engineering Postdoc Collaborative Research funding rounds, the Faculty of Engineering Research Committee and six Faculty of Medicine Departments are delighted to announce a joint funding opportunity for postdocs.

All postdocs from the Faculty of Engineering are eligible, in addition to postdocs from the following Faculty of Medicine departments:

  • Brain Sciences
  • Infectious Diseases; Metabolism
  • Digestion and Reproduction
  • NHLI
  • Surgery and Cancer
  • Institute of Clinical Sciences.

In total £35,000 is available to support the Dame Julia Higgins Postdoc Collaborative Research Fund 2022. 

This fund was introduced to give postdocs at the Faculty of Engineering and Faculty of Medicine the opportunity to apply for and be awarded their own research funding, develop and deliver a collaborative research project, and take a step towards becoming independent from the research of their PI.

The fund promotes collaboration between postdocs in the Faculties of Engineering and Medicine, whereby funding applications submitted must involve a minimum of two postdocs from different departments. The postdocs taking part can be from any department within Engineering or from Brain Sciences; Infectious Diseases; Metabolism, Digestion and Reproduction; NHLI; Surgery and Cancer; or Institute of Clinical Sciences. Unfortunately, postdocs from departments not specified above cannot take part in this funding call. To facilitate the interaction between the departments, networking events precede the proposal deadline.

The Faculty of Engineering and Medicine proposals that have been funded in previous years:

Accordion widget 2022

2022

Engineering Leads

Evaluation of hydrogen embrittlement during manufacturing and lifetime of Ni mat electrocatalyst

Livia Cupertino Malheiros (Civil and Environmental Engineering), Mengzheng Ouyang (Earth Science and Engineering).

Highly stable organic and perovskite photoelectrodes for water splitting using electrospun conductive nanofiber network

Matyas Daboczi (Chemical Engineering), Mengzheng Ouyang (Earth Science and Engineering), Catalina Pino-Munoz (Earth Science and Engineering), Gurpreet Singh (Materials). 

Novel design of metal-ceramic joints using additive manufacturing

Rohit Malik (Materials), Reece Oosterbeek (Mechanical Engineering), Alfredo Fantetti (Mechanical Engineering). 

Electric conductive cement-based composites by co-electrospinning-electrospraying for energy storage

Mengzheng Ouyang (Earth Science and Engineering), Marcus Yio (Civil and Environmental Engineering) 

Closed-loop predation to uncover the neural mechanisms of sensorimotor prediction in insects

Jack Supple (Bioengineering), Dorian Florescu (Electrical and Electronic Engineering), Mark Runciman (Surgery & Cancer), Alexandra M Yarger (Bioengineering). 

Development of novel high-performance cathodes for CO2 reduction

Tian Tian (Chemical Engineering), Mengzheng Ouyang (Earth Sciences and Engineering). 

From the atom to the structure: understanding hydrogen-microstructure interactions in new 3D printed metals to reshape the energy landscape

Alfredo Zafra (Civil and Environmental Engineering), Abigail Ackerman (Materials).

 

Medicine Leads

Leaky gut syndrome: a non-invasive mapping of gut permeability

Jacob Broughton-Venner (MDR), Kai Riemer (Bioengineering).

Soft Growing Robot for Ovarian Cancer Detection

Mark Runciman (Surgery & Cancer), Shen Treratanakulchai (Mechanical Engineering). 

AI-assisted single pixel imaging of fast-moving cells

Yuchen Xiang (MDR), Sibo Cheng (Computing), Chen Chen (Computing) 

Designing ATR Kinase peptide-based inhibitors as novel chemotherapeutics

Luke Yates (Infectious Diseases), Othman Almusaimi (Chemical Engineering) Richard Kelwick (Infectious Diseases), Mingxia Guo (Chemical Engineering). 

SCANS - microneedleS to reduCe misdiAgnosis of skiN diSease

Maria Bernarda Zamora Talaya (Surgery & Cancer), Patrick Kierkegaard (Surgery & Cancer), Isobel Steer (Bioengineering).

The Faculty of Engineering proposals that have been funded in previous years:

years

2021

Delivering cell penetrating peptides non-invasively into the brain to target glial-related brain diseases

Dr Othman Al Musaimi - Chemical Engineering; Dr Sophie Morse – Bioengineering 

GelPen: A Handheld Bioink Printer Using Microfluidic Mixing

Dr Nicola Contessi Negrini – Bioengineering; Dr Muhsincan Sesen -  Bioengineering; Dr Dominic Wales - Electrical and Electronic Engineering

Self-righting: from Insect to Robot

Dr Samuel Fabian – Bioengineering; Dr Maria Kaimaki – Bioengineering;  Dr Simon Smith-Bize - Computing 

Microneedle-Based Wearable Device for Continual Glucose Monitoring in Interstitial Fluid

Dr Yubing Hu - Chemical Engineering; Dr Yasin Cotur -  Bioengineering; Dr Pavani Cherukupally - Chemical Engineering 

Novel formulations delivered by focused ultrasound to treat Alzheimer’s disease

Dr Sophie Morse – Bioengineering; Dr Talia Shmool – Chemical Engineering 

Soft Metamaterial Wearable Sensors to Measure the Foot Contact Forces During Walking

Dr Inigo Sanz-Pena – Mechanical Engineering; Dr Hang Xu - Materials 

Understanding the pollution filtration properties of leaves using contrasting imaging and element mapping techniques

Dr Gloria Young – Materials; Dr Rebekah Moore – Earth Science and Engineering 

Adaptive Multi-stable Metamaterials for Contour Recognition

Dr Hang Xu – Materials; Dr Zhixiang Chen - Electrical and Electronic Engineering

2019

Cartilage regeneration using electrical stimulation paired with conductive hydrogels

Dr Michael Bruyns-Haylett – Bioengineering, Dr Panagiotis Kassanos - Computing (Hamlyn Centre), Dr Meysam Keshavarz - Computing (Hamlyn Centre).

Development of Biorecognition-Element Implanted 3D printed Electrodes: Towards a Cervical Cancer Screening Test

Dr Robert Channon – Bioengineering, Dr Binbin Chen - Mechanical Engineering, Dr Xinhua Liu - Dyson School of Design Engineering

Biomechanics of ulceration in diabetic feet: a dynamic FEM-DEM approach

Dr Ado Farsi - Earth Science and Engineering, Dr Enrica Papi – Bioengineering

Metal 3D printed structures: evaluating the effect of residual stresses

Dr Nicolas Hadjipantelis - Civil & Environmental Engineering, Dr Ado Farsi - Earth Sciences and Engineering

Improving the reliability of low-cost brain monitoring systems for healthcare applications

Dr Syed Anas Imtiaz – EEE, Dr Hafiz Amin - Mechanical Engineering

Hollow core particles for non-invasive measurement of pressure

Dr Muhsincan Sesen – Bioengineering, Dr Wenqian Chen - Chemical Engineering, Dr Ado Farsi - Earth Science and Engineering

Hydrodynamic Sampling and Sensing of Nucleic Acids from Biofluids

Dr Sze-yin Tan - Chemical Engineering, Dr Robert Channon - Bioengineering

3D-printed bioadhesive hydrogel-based patches for regenerative healing of lung tears

Dr Dominic Wales - Computing (Hamlyn Centre), Dr Carmel Howe – Bioengineering, Dr Meysam Keshavarz - Computing (Hamlyn Centre)

Green suspension systems of road vehicles for improved ride comfort and fuel economy

Dr Min Yu - Mechanical Engineering, Dr Boli Chen – EEE, Dr Hailing Fu – Aeronautics

2018

MINI - Multiscale Investigation of Nucleate-boiling and Interfaces

Dr Mirco Magnini – Chemical, Dr Edward Smith- Mechanical, Dr Victor Voulgaropoulos - Chemical

Closed-Loop Antibiotic Dosing

Dr David Freeman – Bioengineering, Dr Sally Gowers – Bioengineering, Dr Pau Herrero – EEE

Democratizing access to water resources usage through a high-performance approach to efficient modelling using cloud-based custom hardware

Dr Matei Istoan – EEE, Dr Jimmy O’Keeffe – Civil, Dr James Davis – EEE, Dr Shane Fleming – Chemical

Development of low cost orthotic device for foot and ankle trauma patients in landmine affected countries

Dr Grigorios Grigoriadis – Bioengineering, Dr Chris Natt – Bioengineering, Dr Geoffrey Ng -Mechanical

Novel High-Performance Graphene Nanocomposites for Industrial CO2 Capture

Dr Diana Iruretagoyena – Chemical, Dr Debashis Puhan – Mechanical, Dr Sarah Hedberg –Chemical, Dr Di Zhang - Chemical

Feasibility study combining an activity-based urban transport model with air turbulence flow simulation to analyse the impact of traffic on air quality in London

Dr Koen H. van Dam – Chemical, Dr Dunhui Xiao - Earth Science and Engineering

Novel microphone array structures for high resolution spatial audio processing

Dr Alastair Moore – EEE, Dr Lluís Guasch - Earth Science and Engineering

High-accuracy ultra-sonic monitoring of corrosion on metallic substrates

Dr Franky Bedoya-Lora - Chemical, Dr Bo Lan – Mechanical

2017

Towards robot-assisted rehabilitation for Parkinson’s Disease

Dr Javier Andreu-Perez – Computing, Dr Enrico Franco – Mechanical, Dr Riccardo Secoli – Mechanical

Biocompatible electropolishing of additive manufactured titanium bone substitute

Dr Andrew Ballantyne – Materials, Dr Richard van Arkel – Mechanical

Extractability and mobility of pharmaceutical compounds from sewage sludge recycled to agricultural soil as a sustainable source of nutrients for crop growth

Dr Janice Kenney – ESE, Dr Jonathan Ritson – Civil & Environmental, Dr Hannah Rigby - Civil & Environmental

Additive manufacture of a spine surrogate for assessing injury risk during under vehicle explosions

Dr Nicolas Newell – Bioengineering, Dr Spencer Barnes – Mechanical, Dr Deborah Adkins – Dyson

A biomimetic approach to design green buildings based on thermoregulation and ventilation of termite mounds

Dr Kamaljit Singh – ESE, Dr Deborah Adkins – Dyson

Read the funded proposals and final reports (Imperial login required). 

Please contact Karen Hinxman with any queries.