In this section

Academic publications

Citation

BibTex format

@article{Chang:2021:10.1016/j.powtec.2021.04.018,
author = {Chang, S and Zou, Z and Liu, J and Isac, M and Cao, XE and Su, X and Guthrie, RIL},
doi = {10.1016/j.powtec.2021.04.018},
journal = {Powder Technology},
pages = {125--135},
title = {Study on the slag-metal interfacial behavior under the impact of bubbles in different sizes},
url = {http://dx.doi.org/10.1016/j.powtec.2021.04.018},
volume = {387},
year = {2021}
}

Download

RIS format (EndNote, RefMan)

TY  - JOUR
AB  - A novel ladle shroud was employed to produce small bubbles to remove inclusions smaller than 50 μm meanwhile inhibiting the formation of slag eye. Both water modeling and industrial tests were carried out to confirm the generation of small bubbles with the ladle shroud. The numerical model was developed to investigate slag-metal interfacial behaviors, considering the effects of bubble sizes and distributions. The gas flux through the surface was employed to evaluate the impact of bubble swarm on slag layer. The results show that reducing bubble sizes can effectively disperse bubbles passing through the slag layer, so as to inhibit the formation of slag eye, under the same gas flow rate. The diameter of slag eye matches well 1.7 times diameter of the region with gas flux higher than 0.0025 m/s. The heat loss of the entire tundish was estimated, considering the convection and radiation heat transfer of slag eye.
AU  - Chang,S
AU  - Zou,Z
AU  - Liu,J
AU  - Isac,M
AU  - Cao,XE
AU  - Su,X
AU  - Guthrie,RIL
DO  - 10.1016/j.powtec.2021.04.018
EP  - 135
PY  - 2021///
SN  - 0032-5910
SP  - 125
TI  - Study on the slag-metal interfacial behavior under the impact of bubbles in different sizes
T2  - Powder Technology
UR  - http://dx.doi.org/10.1016/j.powtec.2021.04.018
VL  - 387
ER  -